Sony KD-65X9500B Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. KD-65X9500B
  6. Service manual

Sony KD-65X9500B Service Manual

Rb2t chassis
Hide thumbs Also See for KD-65X9500B:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Sony KD-65X9500B

Summary of Contents for Sony KD-65X9500B

  • Page 2 KD-65/85X9500B...
  • Page 3 Components identified by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual.

  • Page 4: Warnings And Cautions

    WARNINGS AND CAUTIONS When repairing the LCD panel, be sure you are grounded by using a wrist band. When repairing the LCD panel on the When repairing the LCD panel on the wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. all the LCD panel m st be sec red sing the 4 mo nting holes on the rear co er Do not press on the panel or frame edge to avoid the risk of electric shock.
  • Page 5 After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. 2.

  • Page 6: Safety Check-Out

    SAFETY CHECK-OUT KD-65/85X9500B...

  • Page 7: Diagnostic Test Indicators

    The units in this manual contain a self-diagnostic function. If an error occurs, the Smart Core Red LED will automatically begin to flash. The number of times the LED flashes translates to a probable source of the problem. A definition of the Smart Core Red LED flash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.

  • Page 8: Self Diagnosis Function

    SELF DIAGNOSIS FUNCTION [SELF DIAGNOSTIC SCREEN DISPLAY] Error item name *Following error is invalid in RB2. FAN_ERR EMIT_ERR TCON_ERR Model Name :KDL-RB2T Serial Number :1000162 Package Number :PKG0.410EUA MAC address SELF CHECK Device ID :B0:00:02:4D:72:88 of Wi-Fi USB Wired Mac Wired Mac :D8:D4:3C:A2:EE:9F :D8:D4:3C:A2:EE:9F...

  • Page 9: Self-Diagnostic Screen Display

    SELF DIAGNOSIS FUNCTION SELF-DIAGNOSTIC SCREEN DISPLAY For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for confirmation on the screen: [To Bring Up Screen Test] In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below: * : Note that this differs from entering the service mode (volume +)
  • Page 10 • There are clutch in the yellow frame[ ]. Therefore please be careful in the case of the disassembly or assembly of parts. KD-65/85X9500B...
  • Page 11 DISASSEMBLY 1-1-1. STAND 2 Screws (SCREW, +PSW M5X16) P/N: 2-580-608-01 2 Screws (SCREW, +PSW M5X16) P/N: 2-580-608-01 STAND,LEFT (2L MIA) STAND,RIGHT (2L MIA) P/N: 4-486-545-02 P/N: 4-486-550-02 KD-65/85X9500B...

  • Page 12: Camera Module

    DISASSEMBLY 1-1-2. CAMERA MODULE EXTERNAL TYPED Screw (SCREW +PSW M4X10) P/N: 4-159-298-01 CAMERA MODULE EXTERNAL TYPED KD-65/85X9500B...
  • Page 13 DISASSEMBLY 1-1-3. COVER, TERMINAL SIDE COVER, TERMINAL SIDE KD-65/85X9500B...
  • Page 14 DISASSEMBLY 1-1-4. COVER, TERMINAL REAR COVER, TERMINAL REAR KD-65/85X9500B...
  • Page 15 DISASSEMBLY 1-1-5. LABEL, REAR TERMINAL/LABEL, SIDE TERMINAL LABEL, SIDE TERMINAL LABEL REAR TERMINAL LABEL, REAR TERMINAL KD-65/85X9500B...
  • Page 16 DISASSEMBLY 1-1-6. REAR COVER (2L MIA) A REAR COVER (2L MIA) A 16 Screws (SCREW, +PSW M3X6 STEP) P/N: 4-457-815-02 CATCH, HOOK N 1 Screw (SCREW, +PSW M4X10) P/N: 4-159-298-01 3 Screws (SCREW, +BVTP 4X12 TYPE2 IT-3) P/N: 2-580-639-01 4 Screws (SCREW, ORNAMENTAL M6X12) P/N: 4-268-126-02 KD-65/85X9500B...
  • Page 17 DISASSEMBLY 1-1-7. TAPE TAPE TAPE TAPE TAPE TAPE KD-65/85X9500B...

  • Page 18: Wire Dressing

    DISASSEMBLY 1-1-8. WIRE DRESSING KD-65/85X9500B...
  • Page 19 DISASSEMBLY 1-1-9. TAPE TAPE TAPE KD-65/85X9500B...
  • Page 20 DISASSEMBLY 1-1-10. TAPE TAPE TAPE KD-65/85X9500B...
  • Page 21 DISASSEMBLY 1-1-11. WIRE DRESSING KD-65/85X9500B...
  • Page 22 DISASSEMBLY 1-1-12. WIRE DRESSING KD-65/85X9500B...
  • Page 23 DISASSEMBLY 1-1-13. AC INLET ASSY AC INLET ASSY Screw (SCREW, +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 24 DISASSEMBLY 1-1-14. AC INLET BRACKET, AC INLET AC INLET 2 Screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 KD-65/85X9500B...
  • Page 25 DISASSEMBLY 1-1-15. USB ASSY USB ASSY KD-65/85X9500B...
  • Page 26 DISASSEMBLY 1-1-16. USB HOLDER, CABLE WITH CONNECTOR (USB) and BRACKET, TOP (MIA) USB HOLDER CABLE WITH CONNECTOR (USB) BRACKET, TOP (MIA) KD-65/85X9500B...

  • Page 27: Connector Assy

    DISASSEMBLY 1-1-17. CONNECTOR ASSY CONNECTOR ASSY, 3P CONNECTOR ASSY 20P P/N: 1-846-714-11 P/N: 1-910-109-27 KD-65/85X9500B...
  • Page 28 DISASSEMBLY 1-1-18. SWF-SPEAKER BOX ASSY SWF-SPEAKER BOX ASSY KD-65/85X9500B...
  • Page 29 DISASSEMBLY 1-1-19. SPEAKER BOX ASSY (L) SPEAKER BOX ASSY (L) KD-65/85X9500B...
  • Page 30 DISASSEMBLY 1-1-20. SPEAKER BOX ASSY (R) SPEAKER BOX ASSY (R) KD-65/85X9500B...
  • Page 31 DISASSEMBLY 1-1-21. BRACKET, SC(MIA 2L) BRACKET, SC(MIA 2L) BRACKET, SC(MIA 2L) 2 Screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 KD-65/85X9500B...
  • Page 32 DISASSEMBLY 1-1-22. SMART CORE SMART CORE KD-65/85X9500B...
  • Page 33 DISASSEMBLY 1-1-23. SWITCH UNIT ASSY SWITCH UNIT ASSY KD-65/85X9500B...
  • Page 34 DISASSEMBLY 1-1-24. HARNESS ASSY (MAIN) HARNESS ASSY (MAIN) P/N: 1-910-109-25 KD-65/85X9500B...
  • Page 35 DISASSEMBLY 1-1-25. SLIDE, CLAMP SLIDE, CLAMP KD-65/85X9500B...
  • Page 36 DISASSEMBLY 1-1-26. SHEET (CORE), C SHEET (CORE), C SHEET (CORE), C KD-65/85X9500B...
  • Page 37 DISASSEMBLY 1-1-27. TAPE (DK020FR-19) 19X70 SHEET TAPE (DK020FR-19) 19X70 SHEET KD-65/85X9500B...
  • Page 38 DISASSEMBLY 1-1-28. BRACKET, SWF (2L MIA) BRACKET, SWF (2L MIA) 6 Screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 39 DISASSEMBLY 1-1-29. HOLDER, SIDE SW (MIA) HOLDER, SIDE SW (MIA) Screw (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 KD-65/85X9500B...

  • Page 40: Wire Dressing

    DISASSEMBLY 1-1-30. WIRE DRESSING KD-65/85X9500B...
  • Page 41 DISASSEMBLY 1-1-31. CONNECTOR ASSY AND HARNESS ASSY HARNESS ASSY P/N: 1-910-109-26 CONNECTOR ASSY 28P P/N: 1-910-109-24 KD-65/85X9500B...
  • Page 42 DISASSEMBLY 1-1-32. BRACKET, STAND (MIA) BRACKET STAND (MIA) BRACKET, STAND (MIA) Don’t put the bracket on the dowel. 4 Screws (SCREW, +PSW M4X10) P/N: 4-159-298-01 KD-65/85X9500B...
  • Page 43 DISASSEMBLY 1-1-33. BRACKET, RL (MIA) BRACKET RL (MIA) BRACKET, RL (MIA) 2 Screws (SCREW, +PSW M4X10) P/N: 4-159-298-01 KD-65/85X9500B...
  • Page 44 DISASSEMBLY 1-1-34. BRACKET, VESA (MIA) BRACKET, VESA (MIA) 4 Screws (SCREW, +PSW M4X10) P/N: 4-159-298-01 KD-65/85X9500B...

  • Page 45: Flexible Flat Cable

    DISASSEMBLY 1-1-35. FLEXIBLE FLAT CABLE FLEXIBLE FLAT CABLE 30P P/N: 1-910-109-29 FLEXIBLE FLAT CABLE 20P P/N: 1-910-109-19 KD-65/85X9500B...
  • Page 46 DISASSEMBLY 1-1-36. TAPE TAPE TAPE TAPE KD-65/85X9500B...
  • Page 47 DISASSEMBLY 1-1-37. FLEXIBLE FLAT CABLE FLEXIBLE FLAT CABLE(41P) P/N: 1-848-310-11 FLEXIBLE FLAT CABLE 51P (HX65) P/N: 1-848-311-11 KD-65/85X9500B...
  • Page 48 DISASSEMBLY 1-1-38. BRACKET, SIDE (MOLD) BRACKET, SIDE (MOLD) KD-65/85X9500B...
  • Page 49 DISASSEMBLY 1-1-39. PLATE, MAIN (MIA) ASSY PLATE, MAIN (MIA) ASSY 8 Screws (SCREW +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 50 DISASSEMBLY 1-1-40. K0 4 Screws (SCREW (+PSW) (M3X6)) P/N: 2-990-421-41 KD-65/85X9500B...
  • Page 51 DISASSEMBLY 1-1-41. TUS 4 Screws (SCREW +PSW M3X6 W12) 4 Screws (SCREW +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 52 DISASSEMBLY 1-1-42. BAXF BAXF 7 Screws (SCREW +PSW M3X6) P/N: 2-990-421-41 KD-65/85X9500B...
  • Page 53 DISASSEMBLY 1-1-43. SHEET, THERMAL (BAF)/SHEET, THERMAL (EU TU)/SPACER (G A) SHEET, THERMAL (BAF) SHEET THERMAL (EU TU) SHEET, THERMAL (EU TU) SPACER (G A) KD-65/85X9500B...
  • Page 54 DISASSEMBLY 1-1-44. GASKET(TU) GASKET(TU) KD-65/85X9500B...
  • Page 55 DISASSEMBLY 1-1-45. G3 5 Screws (SCREW +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 56 DISASSEMBLY 1-1-46. G4B 5 Screws (SCREW +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 57 DISASSEMBLY 1-1-47. SPACER KD-65/85X9500B...
  • Page 58 DISASSEMBLY 1-1-48. SHEET, INSULATION (G34) SHEET, INSULATION (G34) KD-65/85X9500B...

  • Page 59: Lcd Panel

    DISASSEMBLY 1-1-49. LCD PANEL LCD PANEL LCD PANEL KD-65/85X9500B...
  • Page 60 DISASSEMBLY 1-2-1. LIGHT CASE ASSY LIGHT CASE ASSY KD-65/85X9500B...
  • Page 61 DISASSEMBLY 1-2-2. BACK COVER (M) BACK COVER (M) Screw (SCREW +BVTP 4X12 TYPE2 IT-3) P/N: 2-580-639-01 KD-65/85X9500B...
  • Page 62 DISASSEMBLY 1-2-3. MIC UNIT MIC UNIT KD-65/85X9500B...
  • Page 63 DISASSEMBLY 1-2-4. BT MODULE BT MODULE KD-65/85X9500B...

  • Page 64: Wireless Lan Card

    DISASSEMBLY 1-2-5. WIRELESS LAN CARD WIRELESS LAN CARD KD-65/85X9500B...
  • Page 65 DISASSEMBLY 1-2-6. FRONT COVER (M) FRONT COVER (M) KD-65/85X9500B...
  • Page 66 DISASSEMBLY 1-2-7. TOP COVER (L) TOP COVER (L) KD-65/85X9500B...
  • Page 67 DISASSEMBLY 1-2-8. HSC2-M BOARD HSC2-M BOARD KD-65/85X9500B...
  • Page 68 DISASSEMBLY 1-2-9. BOTTOM CASE (LL) A BOTTOM CASE (LL) A KD-65/85X9500B...

  • Page 69: How To Entering Service Mode

    HOW TO ENTERING SERVICE MODE 1) Turn on the main power switch to place this set in standby mode. 2) Press the buttons on the remote commander as follows, and entering service mode. 3) Service mode display. Note: First of all when you enter Service Mode you can see “Digital” service mode Note: First of all, when you enter Service Mode, you can see Digital service mode.
  • Page 70 ADJUSTMENT 4) How to use the remote commander. 5) After entering service mode then turn off the power switch 5) After entering service mode, then turn off the power switch. KD-65/85X9500B...

  • Page 71: Change Data

    ADJUSTMENT CHANGE DATA Note: “Digital” service mode don’t have to Save ( Note: Digital service mode don t have to Save. ( except except “002 MODEL”) 002 MODEL ) 1) Change Data of “Digital” service mode. ( except “003 DIG_SRV_MODE” category) a.
  • Page 72 ADJUSTMENT 2) Change Data of “Digital” service mode. ( “003 DIG_SRV_MODE” category) “003 DIG SRV MODE” i “003 DIG_SRV_MODE” is one category of “Digital” service mode. f “Di it l” Please note because this operation is special. a. Press “2 / 5” on remote to select “003 DIG_SRV_MODE”. b.
  • Page 73 ADJUSTMENT SAVE CHANGING DATA 1 (Only when B* board is replaced) In “Digital” service mode In Digital service mode “002 MODEL” category) 000 SEGSelect segment information 001 DEST Select destination information 002 MODELNAME Select Model Name 003 SERIAL Can be set Only Once for the new board 005 VAR_TYPE Select variable information Change data for each model.
  • Page 74 ADJUSTMENT SAVE CHANGING DATA 2 1) Write data for “Chassis” or “VPC” service mode 1) Write data for Chassis or VPC service mode a. Press “Mute” on remote. It shows green “ SERVICE ” changes to green “ WRITE ”. b.

  • Page 75: White Balance Adjustment

    ADJUSTMENT WHITE BALANCE ADJUSTMENT Note: Please execute this adjustment if necessary Note: Please execute this adjustment if necessary. Change Data of “VPC” service mode. ( “003 WB” category) a. Press “1” or “4” on remote to select WB adjustment menu. b.

  • Page 76: Set To Shipping Condition

    ” changes to green “ SERVICE ”. f. And BLINK Smart Core WHITE LED. Writing process is done at this point. SONY <Another way> You can set to shipping condition w/o entering Service Mode. -> “Cursor Up” on remote + “Power Key” on TV.
  • Page 77 RED DOT: Most likely defective part BLUE TRIANGLE: Secondary possible defective part BLACK TEXT: Board that may correct the symptom Symptoms - Shutdown. Power LED Video Bluetooth Remote Network Audio Skype Smart Core blinking red diagnostics sequences Power - missing or distorted (BT) No White Bluetooth /...

  • Page 78: Troubleshooting

    TROUBLE SHOOTING No Power Replace Check STBY 3.3V Between G* Board to G* Board L9700 or C9707 B* Board Harness B Board Harness Harness B* Board DC/DC converter check KD-65/85X9500B...
  • Page 79 TROUBLE SHOOTING 1) DC/DC converter check START Check C9159, 9161 Check C9168 Check F9106 or C9163 Voltage. Check F9105 is it 1.18V? Is the voltage 1V? Check C9158 or C9160 Voltage. Check F9104 Is the voltage 5V? Is the voltage 5V? Check C9120 Voltage.
  • Page 80 TROUBLE SHOOTING 1) 3 times blinking (DC Alert & Communication Error) 3-time blinking HDMI TUNER DC_ALERT I2CD bus DMD_TU_I2C I2CD bus check: Dumping resistor or I2CB bus check: AUDIO Probe CL5423, or Ayu2 Probe CL2101, I2C bus dumping or Check CL5428 or FW of IC3150 CL2102 / CL2318...
  • Page 81 TROUBLE SHOOTING 2) 3 times blinking (Audio Error) (Audio amp. error detection. or Audio amp. I2C ud o a p communication error detection.) Go to 3-4-2. No Sound Power Off Check Go to 3-4-3. No Sound Power On Check KD-65/85X9500B...
  • Page 82 TROUBLE SHOOTING 3) 4 times blinking (LED Voltage Error) KD-65/85X9500B...
  • Page 83 TROUBLE SHOOTING 4) 5 times blinking (T-Con Error) KD-65/85X9500B...
  • Page 84 TROUBLE SHOOTING 5) 6 times blinking (Backlight Error) KD-65/85X9500B...
  • Page 85 TROUBLE SHOOTING 6) 7 times blinking (Temperature Error) 7-time blinking Setting circumstance is OK? Set to another Temperature, location, etc. Ventilation, etc. Change B* Board Change B* Board, and Aging a few Panel hours Symptom improvement improvement I2CA bus check: Temp sensor B* Board HDMI is working?
  • Page 86 TROUBLE SHOOTING No Sound Without LED 3x No sound only Analog RF and Tuner relation issue Digital RF ? [Speakers] setting is Change the setting to [Audio System] ? [TV Speakers] No sound only HDMI ? HDMI relation issue → AV receiver is Select [External Inputs] →...
  • Page 87 TROUBLE SHOOTING 3-4-1. No Sound Audio No Sound Audio From 3-4 Replace B-K Harness OK ? Replace K-PWB OK ? (check / diagnose K-PWB itself before replace. See next page.) See next page ) Replace B-PWB OK ? Finish Finish KD-65/85X9500B...
  • Page 88 TROUBLE SHOOTING 3-4-2. No Sound Power Off Check Power Off Check Power Off Check From 3-3 or 3-4 From 3-4 (1) K-PWB PVDD-GND short ? (See APPENDIX-5) Measure the Speaker impedance by multi meter impedance by multi-meter Replace Speaker Replace Speaker Less than 3 Ω...
  • Page 89 TROUBLE SHOOTING 3-4-3. No Sound Power On Check Power On Check From 3-3 (4) 12.5V check K1-PWB (HJ) (4) 12.5V check Measure voltage between PVDD and GND at capacitor C4341, 12.5V is supplied to C4342, C4441 or C4442. (See 3.3) K-PWB for a moment Voltage rise more than 0V for a moment at power on before LED 3x blinking ?
  • Page 90 TROUBLE SHOOTING 3-4-4. No Sound Audio HP/Audio out No Sound Audio HP/Audio out [Sound] → [Headphone] [Subwoofer] [Headphone/Audio out] is set to ? Set [Headphone/Audio Out] [Audio Out] to [Headphone] or [Audio Out] Headphone Volume is set to MIN? Replace B-PWB Replace B-PWB Replace B PWB Increase Headphone Volume...
  • Page 91 TROUBLE SHOOTING No Picture Replace All blue picture is on? Check the G*- the B-Tcon, B-LD* Change B* Board (Factory SW Harness is booted ) is booted.) Symptom Symptom improvement improvement B-Tcon, B-LD* B* Board Harness B* Board LCD Panel Change G* Board (T con (T-con,...
  • Page 92 TROUBLE SHOOTING 1) EXT. Analog Video/Component Input Video 1 Video 2 Component No Picture No Picture No Picture Check J3104 Check J3104 Conn Check J3101 Check if input OSD Connection, Check if input OSD Check if input OSD VIDEOB_DET at connection, is GREY OUT is GREY OUT...
  • Page 93 TROUBLE SHOOTING Change Switch Unit Side Key button Switch unit issue malfunction Harness on Switch Unit Harness connection and B* Board properly connected and B Board properly connected issue issue Change Harness issue Harness issue Switch unit-B* board Harness Change B* Board KD-65/85X9500B...
  • Page 94 TROUBLE SHOOTING Check whether center Center white LED Remote control battery IR do not response to white LED blink ,when using lit up when remote is could be weak. Remote Commander commander near the control is pressed Change battery. sensor windows Harness on H- Harness connection board and B* Board...
  • Page 95 TROUBLE SHOOTING Backlight doesn’t change Check UI setting for light User did not activate light Change the UI when ambient lighting Sensor. Make sure it is “on” sensor function setting to “:ON” level changed Harness on H-board and Harness connection B* Board issue properly connected...
  • Page 96 TROUBLE SHOOTING [Network Set-up] >[Wired Set-up] on the TV Connection Results Connection Results Connection Results B board Cable Connection Local Access Internet Access Failed Failed Failed Auto Check Proxy setting Wired Set-up Check cable B board Local router IP address setting IP address setting DHCP server Manual...
  • Page 97 TROUBLE SHOOTING Wireless Network on the TV Error Message appear Is the radio field when the Wireless Strength too weak Strength too weak Bxx Board oa d Network is selected? or even No signal? Change WiFi module WiFi Access Point Access Point WiFi module Check harness...
  • Page 98 TROUBLE SHOOTING Service Menu 001 OP 000 VERS 000 VERS Touch pad Remote doesn’t work Touch pad Remote doesn t work <MAIN> <EXT> One touch remote doesn’t work DM0.001JPA WF: 3.0.0.1021 WF0.300W00AA WF: -------- 3D-glasses (Active) doesn’t work DF2.070W00AA FD: 0.003 YM0.619W00AA BT: Confirm M4.922C...
  • Page 99 TROUBLE SHOOTING *(2) BT Active 3D glasses doesn’t work (2) BT Active 3D glasses doesn t work <2 8V <2.8V k 3D Gl Check 3D-Glasses Replace to New Battery and try again. Battery voltage is (use CR2025 only.) >2.8V? Registered Registered Check if 2.4GHz devices are used or not? Restart TV.
  • Page 100 TROUBLE SHOOTING Far-end user needs Far-end pic Camera function doesn’t to prepare Camera Self pic? Check Video Call Far-end issue work well device or unmute Far-end pic? camera function Self pic Self pic Check camera direction. Check self pic by push Camera module is set “Social Viewing”...
  • Page 101 TROUBLE SHOOTING Mic function doesn’t work Update SW to latest Network Check well. Version. RC OFF/ON Noise source check near User environment issue the microphone. Change harness Harness issue Change Mic Unit Mic unit issue Change B*Board Change B Board KD-65/85X9500B...
  • Page 102 To SP : K0 board / 2 1ch : K0 board / 2.1ch Comp I2C-E A/D/E PC(B2B) Brownie B-CAS B CAS /CI/CI+ Tuner Tuner Demod. I2C-B Opt. DIMMER PWM I2C-D Tiny Local Dimming Local Dimming HDMI HDMI HDMI 3 Intelligent Peak LED Deneb (MHL2) HDMI...
  • Page 103 DIAGRAMS 1-821-117-11 SYT10-03HG E R_KEY A D 2 8 2 1-143-11 1- 8 HUS_POW HUS_KEY_ HUS_GND KD-65/85X9500B...
  • Page 104 DIAGRAMS KD-65X9500B CAMERA MODULE BAXF SWITCH UNIT SMART CORE SMART CORE BT MODULE WIRESS LAN CARD HSC2-M KD-65/85X9500B...

  • Page 105: Rear Cover

    • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 5-1-1. REAR COVER For Connector , Screws & Stand details, please refer to SEC 1. DISASSEMBLY. KD-65X9500B DESTINATION REF. PART NO PART NO.

  • Page 106: Exploded Views

    EXPLODED VIEWS 5-1-2. SP BOX-1 KD-65X9500B DESTINATION REF. PART NO. DESCRIPTION SANZ AZ1 (Australia, Hong Kong Taiwan New Zealand) 4 487 091 01 HOLDER SIDE SW (MIA) 4-487-091-01 HOLDER, SIDE SW (MIA) • • • 1-798-511-11 SWITCH UNIT (SM-WW) •...
  • Page 107 EXPLODED VIEWS 5-1-3. SP BOX-2 KD-65X9500B DESTINATION REF. PART NO. DESCRIPTION SANZ AZ1 Hong Taiwan (Australia, New Kong Kong Zealand) 4-480-396-01 BRACKET, SIDE (MOLD) • • • 1-474-579-11 G3(CH)-STATIC CONVERTER(TV) • • • 1-474-580-11 G4B(CH)-STATIC CONVERTER(TV) • • • 4-487-095-01 SHEET, INSULATION (G34) •...
  • Page 108 EXPLODED VIEWS 5-1-4. MAIN PLATE KD-65X9500B DESTINATION DESTINATION REF. PART NO. DESCRIPTION SANZ AZ1 Hong Taiwan (Australia, New Kong Zealand) 4-487-101-01 HOLDER, HS WS • • • 4-447-962-01 HOLDER (HS) • • • 4 487 105 01 SHEET THERMAL (AYU2 A) 4-487-105-01 SHEET, THERMAL (AYU2, A) •...
  • Page 109 EXPLODED VIEWS 5-1-5. SMART CORE KD-65X9500B DESTINATION DESTINATION REF. PART NO. DESCRIPTION SANZ AZ1 Hong Taiwan (Australia, New Kong Zealand) 4-480-412-01 BACK COVER (M) • • • 1-458-793-11 MIC UNIT • • • 1 492 760 12 BT MODULE 1-492-760-12 BT MODULE •...
  • Page 110 EXPLODED VIEWS KD-65X9500B REF. DESTINATION PART NO PART NO. DESCRIPTION DESCRIPTION SANZ AZ1 (Australia, Hong Kong Taiwan New Zealand) *4-478-098-51 TRAY (2L MIA) • • *4-478-098-01 TRAY (2L MIA) • 4-486-545-02 STAND,LEFT (2L MIA) • • • 4-486-550-02 STAND,RIGHT (2L MIA) •...
  • Page 111 1-2-1. STAND, LEFT(4LT MIA) /STAND, RIGHT(4LT MIA) 4 Screws (SCREW, +PSW M5X16) P/N: 2-580-608-01 STAND, RIGHT (4LT MIA) STAND, LEFT (4LT MIA) KD-65/85X9500B...
  • Page 112 DISASSEMBLY 1-2-2. CAMERA MODULE EXTERNAL TYPE B Screw (SCREW +PSW M4X10) P/N: 4-159-298-01 CAMERA MODULE EXTERNAL TYPE B KD-65/85X9500B...
  • Page 113 DISASSEMBLY 1-2-3. COVER, TERMINAL SIDE COVER, TERMINAL SIDE KD-65/85X9500B...
  • Page 114 DISASSEMBLY 1-2-4. COVER, TERMINAL REAR COVER, TERMINAL REAR KD-65/85X9500B...
  • Page 115 DISASSEMBLY 1-2-5. LABEL, REAR TERMINAL/LABEL, SIDE TERMINAL LABEL, SIDE TERMINAL LABEL REAR TERMINAL LABEL, REAR TERMINAL KD-65/85X9500B...
  • Page 116 DISASSEMBLY 1-2-6. REAR COVER (4L MIA) L A/REAR COVER (4L MIA) R A/REAR COVER (4L MIA) C A/REAR COVER (4L MIA) B A REAR COVER (4L MIA) L A 26 Screws (SCREW, +FWH M4) P/N: 4-432-981-01 3 Screws (SCREW, +BVTP 4X12 TYPE2 IT-3) P/N: 2-580-639-01 1 Screw (SCREW, +PSW M4X10) P/N: 4-159-298-01 KD-65/85X9500B...
  • Page 117 DISASSEMBLY 1-2-6. REAR COVER (4L MIA) L A/REAR COVER (4L MIA) R A/REAR COVER (4L MIA) C A/REAR COVER (4L MIA) B A REAR COVER (4L MIA) R A REAR COVER (4L MIA) C A KD-65/85X9500B...
  • Page 118 DISASSEMBLY 1-2-6. REAR COVER (4L MIA) L A/REAR COVER (4L MIA) R A/REAR COVER (4L MIA) C A/REAR COVER (4L MIA) B A REAR COVER (4L MIA) B A 4 Screws (SCREW, +PSW M3X6 W12) P/N: 4-256-393-11 KD-65/85X9500B...
  • Page 119 DISASSEMBLY 1-2-7. CATCH, HOOK N CATCH, HOOK N CATCH, HOOK N CATCH, HOOK N KD-65/85X9500B...
  • Page 120 DISASSEMBLY 1-2-8. BRACKET, VESA (MIA 4L) 2 Screws (SCREW, +PSW M5X12) P/N: 2-580-607-01 2 Screws (SCREW, +PSW M5X12) P/N: 2-580-607-01 (SCREW PSW M5X12) P/N 2 580 607 01 BRACKET, VESA (MIA 4L) BRACKET, VESA (MIA 4L) KD-65/85X9500B...
  • Page 121 DISASSEMBLY 1-2-9. TAPE TAPE TAPE TAPE TAPE TAPE KD-65/85X9500B...
  • Page 122 DISASSEMBLY 1-2-10. TAPE TAPE TAPE TAPE TAPE TAPE KD-65/85X9500B...

  • Page 123: Wire Dressing

    DISASSEMBLY 1-2-11. WIRE DRESSING KD-65/85X9500B...
  • Page 124 DISASSEMBLY 1-2-12. TAPE TAPE TAPE TAPE TAPE TAPE KD-65/85X9500B...
  • Page 125 DISASSEMBLY 1-2-13. TAPE TAPE TAPE TAPE TAPE KD-65/85X9500B...
  • Page 126 DISASSEMBLY 1-2-14. WIRE DRESSING KD-65/85X9500B...
  • Page 127 DISASSEMBLY 1-2-15. WIRE DRESSING KD-65/85X9500B...

This manual is also suitable for:

Kd-85x9500b

Table of Contents