Specifications; Model Number; Engine; Fuel System - Exmark Viking Hydro Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
PART NO. 403005
LOCATION: Front Corners of
PART NO. 513746
LOCATION: On Engine Blower
Housing Next to Muffler

2. SPECIFICATIONS

2.1 MODEL NUMBER:

2.2 ENGINE

2.3 FUEL SYSTEM

2.4 SAFETY INTERLOCK SYSTEM

2.5 STEERING/BRAKE CONTROL:

2.6 TRANSMISSION:

Mower Deck
PART NO. 303293
LOCATION: On Top Right
Serial Nos. 220,000 & Higher: VH3615KA; VH4815KA
2.2.1 Engine Specifications: See your Engine Owner's Manual.
2.2.2 3600 RPM (No Load).
2.3.1 Capacity: 5.0 gal.(18.9 L.)
2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries
using the research method, it should be a 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut-Off Valve: 1/4 turn
Operator must have transmission in neutral and blade clutch disengaged to start
engine. Release of OPC levers will cause the engine to stop if hydro transmission is
not in neutral and/or blade clutch is engaged.
Fingertip drive control levers provide independent speed control, braking and neutral
to each drive wheel for moving forward or reverse, stopping and power turning.
Twin Hydrostatic Drive
2.6.1 Two Hydro Gear BDP-10L series variable displacement pumps independently
coupled to two high efficiency Parker/Ross wheel drive motors.
www.mymowerparts.com
PART NO. 303508
LOCATION: On Top Rear Right Hand
Surface of Mower Deck
PART NO. 303102
LOCATION: Upper
Handle
Side of Fuel Tank
- 7 -
PART NO. 513890
LOCATION: On Top of
Hydraulic Tank