Audio; Others - JVC DD-3 Instructions Manual

Changing the initial settings with the preference screen (continued)

AUDIO

? ?
Items
Contents (
DIGITAL Select the output signal type suitable to
AUDIO the device connected to the [LINE-DIGI-
OUTPUT TAL OUT] terminal. Refer to "List of rela-
tionships of DIGITAL AUDIO OUTPUT
preference items and output signal" on
page 40.
PCM ONLY :
Device corresponding only to linear PCM.
DOLBY DIGITAL/PCM :
Dolby Digital decoder or device having
the same function.
STREAM/PCM
DTS/Dolby Digital decoder or device hav-
ing the same function.
DOWN MIX Select the signal suitable to the device
connected to the [LINE-DIGITAL OUT]
terminal. Set "DOWN MIX" only when
"DIGITAL AUDIO OUTPUT" is set to
"PCM ONLY".
DOLBY SURROUND :
Dolby Pro Logic decoder-built-in device.
STEREO :
Ordinary audio device.
D (Dynamic). To correct the difference between high
RANGE volume and low volume when playing
COMPRESSION back with low volume (only for a DVD
recorded with Dolby Digital).
WIDE RANGE :
For enjoying the original full dynamic
range of surround sound without effects.
NORMAL
:
For normal usage. Surround sound is
compressed to a certain level.
HDMI You can select whether or not the audio
AUDIO OUT signal from the [HDMI] terminal is output.
ON :
The audio signal from the [HDMI] is out-
put.
OFF :
The audio signal from the [HDMI] is not
output.
NOTE
• Depending on the connected TV, when
"HDMI AUDIO OUT" is set to "ON",
only PCM signals can be output via an
HDMI cable.
39
: initial setting)
:

OTHERS

? ?
Items
Contents (
RESUME
Select or OFF. (Refer to page 27.)
ON
ON
Select ON or OFF. (Refer to page 26.)
SCREEN
GUIDE
AV When you want to control the main unit
COMPULINK and the connected TV or other devices at
MODE the same time, select a setting according
to the type of terminal on the device con-
nected to the main unit. (Refer to "Using
the AV COMPU LINK function" on page
46.)
DVD1 :
When connecting to the video 3 or DVD
input terminal on the TV.
:
DVD2
When connecting to the video 1 input ter-
minal on the TV.
DVD3 :
When connecting to the video 2 input ter-
minal on the TV.
DivX The main unit has its own registration
REGISTRA- code. You can confirm the registration
TION code, when necessary. Once you have
played back a disc/file on which the regis-
tration code is recorded, the registration
code of the main unit is overwritten for
copyright protection.
NETWORK Refer to the separate volume of the oper-
SETUP ation manual for the network function.
: initial setting)