To Make An External Call - NEC DT750 User Manual

TO MAKE AN EXTERNAL CALL

When dialed telephone number is registered in Per-
sonal Directory, the corresponding name information
will be displayed on LCD while you are hearing a ring-
back tone or are engaged in a conversation. According
to the initial settings, the display may differ from the fol-
lowing examples. For more information, contact the
system administrator.
This section describes the Normal Dial Mode. Regard-
ing the other mode, see
Note
USING SELECTIVE DIALING (DYNAMIC DIAL
PAD, PRESET DIAL)
STEP 1: Lift the handset or press
receive a dial tone.
Line Key which accommodates
My Line of the telephone
31313
1:25 PM
MIC DND
STEP 2: Dial the Central Office access code, e.g. 9.
1:25 PM
MIC DND
TO ORIGINATE A CALL
.
, and you will
Speaker
Station Number
of My Line
31313
MON 12 JUL 2010
>>>
Dialed Code
9
MON 12 JUL 2010
>>>
STEP 3: Dial desired telephone number.
(while hearing a ringback tone)
1:25 PM
MIC
STEP 4: Use handset or MIC to start a conversation.
Display indicates:
(while in a conversation)
• When dialed number is registered in Personal Directory
Name Information
registered in
Personal Directory
TOM JONES
MIC
In the above case, a maximum of eight digits of the
number (including "*") can be displayed. If the dialed
number exceeds eight digits, "the first seven digits of
Note
the number + *" or "the last seven digits of the number +
*" are displayed. For more information, contact the sys-
tem administrator.
• When dialed number is not registered in Personal Direc-
tory
101
Dialed Code + Number
9XXXXXXXXX
MON 12 JUL 2010
>>>
Dialed Code
Elapsed Time
+ Number
9XXXXXX*
00:05
DND >>>