PRESONUS HP4 Owner's Manual page 7

Owner's Manual
2.0 Quick Start Guide
2.1 Getting Started
Connect the Power
Connect Your Input Sources
This Quick Start guide is designed to help get your
HP4 connected to your system as quickly as possible.
The following step-by-step instructions are based
on a common studio environment. Your actual setup
may change based on your needs and applications.
1. Turn every knob on the front panel of the
HP4 completely counterclockwise (left).
2. Connect the included power supply to
the HP4 and plug it in to a wall socket,
power strip, or surge protector.
1. Turn down the main output volume on your
audio interface or mixer to its lowest position.
2. Connect the main outputs of your audio
interface or mixer to the Left and Right TRS
inputs on the back of your HP4. For the best
sound quality, PreSonus recommends us-
ing balanced cables whenever possible.
3. Connect the Left and Right Monitor/Thru outputs
on the back of your HP4 to the inputs of your pow-
ered studio monitors or power amp (if your studio
monitors are passive). This will allow you to use a
single output pair from your audio interface or mix-
er to feed both your HP4 and your studio monitors.
Overview
What's in the Box
1
1.1
3