KTM 125 SX 2010 Owner's Manual page 73

MAINTENANCE WORK ON CHASSIS AND ENGINE
(125 SX, 150 SX)
–
Remove gear oil level check screw
B00049-10
(250 SX)
–
Remove gear oil level check screw
B00050-10
–
Remove screw cap
–
Add gear oil until it flows out of the hole of the gear oil level check screw.
Engine oil (15W/50) (
–
Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check
–
Mount and tighten screw cap
B00053-11
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
.

.

.

p. 94)
M6
.

71
10 Nm (7.4 lbf ft)