KTM 125 SX 2010 Owner's Manual page 261

3
– Loosen the AH bolt
1
NOTE: Disassemble locating lever only if the engine case must be
replaced.
2
– Remove bolt
Dismounting the ignition cover (without electric starter)
– Undo the 4 bolts and remove the ignition cover together with the
Dismounting the ignition (without electric starter)
– Apply the holding spanner
– Remove the collar nut and the spreader ring.
– Put the protection cover 510.12.016.000 on the crankshaft thread,
and remove the shift lock.
1
and the locking lever with the spring and bush.
2
gasket.
collar nut.
screw in the flywheel extractor 546.29.009.044 and remove the
flywheel.
546.29.012.100 and undo the
3
4-6