Getting Ready To Install The Refrigerator - Samsung RS7 Series User Manual

setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy the
many state-of-the-art features and effi ciencies that
this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) fl ooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Overall space required in use. Refer to drawing and
dimension as below.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
50 mm
DA68-02710A-05.indd 14 DA68-02710A-05.indd 14
25 mm
English - 14
at least 50 mm
160º 160º
1724 mm
Spacer
Spacer(gray block) installation
For better performance, please certainly fi x the
spacer on the rear of unit when installing the
refrigerator. It is improving refrigerator performance.
Assembly Method
1. Take out packed spacer from the lowest guard of
the fridge.
2. Check assembly location at the rear of Refrigerator
like picture
3. Locate spacer assembly location and put spacer
on the rear plate of Refrigerator.
at least 50 mm
Spacer Spacer
2013. 12. 26. 2013. 12. 26. 7:29 7:29