The Fat Channel; Fat Channel Processing Guide - PRESONUS StudioLive 24.4.2 Owner's Manual

Performance and recording digital mixers
Hide thumbs Also See for StudioLive 24.4.2:
Table of Contents

Advertisement

4
Controls
4.1

The Fat Channel

4.1.2 Fat Channel Processing Guide

Bus
Inputs (Ch 1-24)
Subgroups
Main Out L/R
Aux Sends 1-10
Internal FX Sends A & B
External FX Returns A & B
Tape Input
Talkback Mic
Solo Bus
Monitor Bus
Selected Channel Meters. In addition, two meters—part of a set of eight meters
located in the top right section of the mixer—are dedicated to displaying
information about the currently selected channel. The meter on the far left of this
section displays the pre-fader input level for the selected channel. The meter to the
right of it displays the gain reduction applied to the selected channel. It is important
to mention that these meters are only active when one of the input channels or an
aux bus is selected.
The following table provides a quick guide to the processing that is
available for each bus in the StudioLive. Note that all of these inputs
and buses can be recorded. For more information on FireWire sends,
please see Section 2.5 in the StudioLive Software Library Manual.
Phase
High-Pass
Reverse
Filter
Noise
Compressor
Gate
StudioLive™ 24.4.2/16.4.2
Owner's Manual
EQ
Limiter
FireWire
Send
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studiolive 16.4.2

Table of Contents