Engine Management With Bmw Motorrad Asc Oe - BMW R 1200 GS Rider's Manual

gine brake, e.g. when riding
6
downhill offroad.
88 Should a fault message result
due to one of the driving condi-
tions described above, the ABS
function can be reactivated by
switching the ignition off and
then on again.
How important is regular
maintenance?
Any technical system is al-
ways only as good as its
maintenance condition.
To ensure that the BMW Motor-
rad ABS is in an optimally main-
z tained condition, it is vital that the
specified inspection intervals be
complied with.
Reserves for safety
But remember: the potentially
shorter braking distances which
BMW Motorrad Integral ABS per-
mits must not be used as an ex-
cuse for careless riding. ABS is
primarily a means of ensuring a
safety margin in genuine emer-
gencies.
Take care when cornering. When
you apply the brakes on a cor-
ner, the motorcycle's weight and
momentum take over and even
BMW Motorrad Integral ABS is
unable to counteract their effects.
Engine management
with BMW Motorrad
OE
ASC
How does ASC work?
The BMW Motorrad ASC com-
pares the wheel speeds of the
front and rear wheel. From the
speed difference the slip, and
with it the stability reserves on
the rear wheel are determined.
When a slip limit is exceeded, the
engine torque is adapted by the
engine management system.
What are the design
characteristics of the
BMW Motorrad ASC?
The BMW Motorrad ASC is an
assistance system for the driv-
er and is designed for driving on
public roads. Especially in at the
limits of driving physics, the driv-
er has a considerable influence
on the control options of the
ASC (shifting weight in curves,
loose loads).
The offroad mode can be activat-
ed when driving offroad. In this
mode the controlling intervention
by the ASC is carried out later,
enabling controlled drifting.
The system is not optimized for
special requirements resulting
under extreme weather condi-
tions offroad or on the racetrack.
The BMW Motorrad ASC can be
deactivated for these cases.