NEC Univerge SV8100 Features And Specifications Manual page 2090

Issue 12.0
Program
Program Name
Number
24-09-03 Call Forward Split Settings –
Interim Call Forwarding
Destination for Both Ring, All
Call, No Answer
24-09-04 Call Forward Split Settings – CO
Call Forwarding Busy
Destination
24-09-05 Call Forward Split Settings –
Intercom Call Forwarding Busy
Destination
80-01-16 Service Tone Setup – Lockout
Tone
Operation
Placing an outside call with pre-dial:
1. Dial 9.
2. Press and hold the
3. Dial the outside number.

4. Press the key (On-Hook/Off-Hook).
For more information on the Wireless DECT (SIP) feature, refer to the NEC SIP DECT Solutions
Manuals.
Off-hook Signaling:
To answer off-hook signaling (2nd call) and answer hold recall of 1st call:

Program 20-13-54 is set to Enable.

Program 20-13-06 is set to Automatically
1. From ext 100 call IP DECT 200 (1st call).
2 - 2060
Description/Comments
Assign Intercom Call Forwarding
Destination for ring, all call and no
answer.
Assign CO Call Forwarding for
busy destinations.
Assign Intercom Call Forwarding
for busy destinations.
Lock Out Tone Repeat Count.
key to insert a pause (–), if necessary.
#
UNIVERGE SV8100
Assigned Data
1
0~9, , , P, R, @
#
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
0~9, , , P, R, @
#
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
0~9, , , P, R, @
#
(Up to 24 digits)
P = Pause
R = Hookflash
@ = Wildcard
(default not assigned)
Value 2 - 255
Wireless DECT (SIP)
Level
2 3



