Installing The Battery Pack - Honeywell Dolphin 7800 Quick Start Manual

Installing the Battery Pack

Dolphin 7800 model terminals are designed for use with standard battery
pack model 7800-BTSC (Li-ion 3.7 V, 8.9 watt hour) and extended battery
pack models 7800-BTXC and 7800-BTXCW (Li-ion 3.7 V, 14.8 watt hour)
manufactured for Honeywell International Inc.
The Dolphin 7800 is shipped with the battery packaged separately from the
terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
2
Note: The terminal does not power ON unless the battery is locked
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
Once the battery is installed, connect the terminal to one of the Dolphin 7800
charging peripherals to charge the battery pack.
Dolphin 7800 Android model terminals are designed for use with the following
7800 charging devices and cables: 7800-HB, 7800-CB, 7800-MB, 7800-MC,
and 7800-USB. The 7800 Android model does not support Ethernet.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
1
4
3
.