Position Adjustment; Power Indicator - JVC LT-37X898 User Manual

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama or cinema.
Press the M
To POSITION ADJUSTMENT
π †
è
To enter
è
To adjust the position
π †
Press the M
Notes:
• To reset the adjustment to the center, press the
O button.
K
• When the arrow disappears, while you are adjusting the position, the position is at its
maximum limit.
• If you select REGULAR, SLIM, FULL or FULL NATIVE size with aspect or Multi Screen,
position adjustment option is not selected.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals, or when PC
mode is set.
• It is also possible to use Position Adjustment when you are in PC Mode
• When you are receiving a 1080p signal, Position Adjustment cannot be selected.

Power Indicator

Power indicator allows you to adjust the brightness of the power indicator.
Press the M
To POWER INDICATOR
π †
è
To turn LOW, HIGH or OFF
Press the M
Notes :
• When OFF is selected :
The LED disappears if you have a TV signal.
The LED is lit as "LOW" when there is no TV signal.
• When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
button
ENU
button to finish
ENU
button
ENU
button to finish
ENU
Initial Setup Menus
OPERATE RESET
OK
INITIAL SETUP
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
NEXT PAGE
SELECT OPERATE
EXIT
MENU
ON
OFF
OFF
(2/5)
EXIT
MENU
33