On-Screen Displays And Data Code - Canon FS1 Instruction Manual

Video
[ ART], [ MOSAIC]
Select one of these digital effects to add "flavor"
to your recordings.
* Only these digital effects are available in
mode.
Setting
FUNC.
( 23)
FUNC.
[ D.EFFECT OFF]
Desired fader/effect*
FUNC.
**
* You can preview the digital effect on the
screen.
** The icon of the selected digital effect
appears.
Applying
1
Press to display the joystick
guide.
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display it.
2
Push the joystick (
• The icon of the selected effect
turns green.
• Push the joystick (
deactivate the digital effect (its
icon will turn white again).
46
) toward .
) again to
T F I
O ADE N
Activate the selected fader in record
pause mode ( ), then press
to start recording with a fade in.
T F O
O ADE UT
Activate the selected fader while
recording ( ), then press
fade out and pause the recording.
T
O ACTIVATE AN EFFECT
mode: Activate the selected
effect while recording or in record
pause mode.
mode: Activate the selected effect
PHOTO
and then press
still image.
NOTES
• When you apply a fader, not only the
picture but also the sound will fade in or
out. When you apply an effect, the
sound will be recorded normally.
• The camcorder retains the last setting
used even if you turn off the digital
effects or change the recording
program.

On-Screen Displays and Data Code

With every scene or still image
recorded, the camcorder keeps a data
code that includes the date, time and
information about the camera setup at
the time of recording. While viewing a
Start/Stop
Start/Stop
to
to record the