Pc Settings - JVC LT-32EM20 User Manual

PC Settings

This function lets you adjust the PC screen position, clock and phase during
PC input.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "DETAIL", then press
[ENTER].
3
Use [Cursor K / L] to select "PC Settings", then press
[ENTER].
4
Use [Cursor K / L] to select the setting you want to
adjust, then press [ENTER].
5
Detail Detail
Closed Caption
V–chip
PC Settings
HDMI1 Audio Auto
On
Energy Saving Mode
PC Settings PC Settings
Auto Adjustment
Horizontal Position 0
0
Vertical Position
Clock 0
Phase 0
6
Adjust the setting.
Auto Adjustment
Use [Cursor K / L] to select "Adjust", then press
[ENTER].
• The Horizontal/Vertical position, clock and phase of
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use [Cursor s / B] to adjust.
Horizontal Position
H. Position 0 -
+
Adjust Move Enter
ENTER
Vertical Position
V. Position 0 -
+
Adjust Move Enter
ENTER
Clock, Phase
Use [Cursor { / B] to adjust "Clock" setting to stabilize
the PC screen and "Phase" setting to improve the clarity
of the PC screen.
Clock
Clock 0
Adjust Move ENTER Enter
Phase
Phase 0
Adjust Move ENTER Enter
Press [SETUP] to exit.
Note:
• Adjust "Phase" setting after "Clock" setting has been
properly adjusted.
• You may not obtain an appropriate screen with auto
adjustment for some signals. In this case, adjust the
settings manually.
Auto Adjustment Auto Adjustment
This function automatically adjusts Cancel
the position, clock and phase of
Adjust
the picture element.
Cursor s Cursor B
to move PC to move PC
screen left screen right
to move PC to move PC
screen down screen up
Cursor s Cursor B
to decrease to increase
setting value setting value
31
EN