Advertisement
363657-YTG-G-0613
ACCESSORIES
Propane (LP) Conversion Kit - This accessory conversion kit
may be used to convert natural gas units for propane (LP) oper-
ation.
1NP0347 - All Models except 130,000 BTU input
1NP0501 - 130,000 BTU input only
Side Return Filter Racks -
1SR0200 - All Models
1SR0302 - All Models
1SF0101 - All Models
Bottom Return Filter Racks - 1BR05xx series are galvanized
steel filter racks. 1BR06xx are pre-painted steel filter racks to
match the appearance of the furnace cabinet.
1BR0514 or 1BR0614 - For 14-1/2" cabinets
1BR0517 or 1BR0617 - For 17-1/2" cabinets
1BR0521 or 1BR0621 - For 21" cabinets
1BR0524 or 1BR0624 - For 24-1/2" cabinets
Masonry Chimney Kits - For installations where these fur-
naces are vented using existing or new lined masonry chim-
neys.
1CK0603
1CK0604
4
Combustible Floor Base Kit - For installation of these fur-
naces in downflow applications directly onto combustible floor-
ing material, These kits are required to prevent potential
overheating situations. These kits are also required in any appli-
cations where the furnace in installed in a downflow configura-
tion without an evaporator coil, where the combustible floor
base kit provides access for combustible airflow.
1CB0514 - For 14-1/2" cabinets
1CB0517 - For 17-1/2" cabinets
1CB0521 - For 21" cabinets
1CB0524 - For 24-1/2" cabinets
High Altitude Pressure Switches - For installation where the
altitude is less than 8,000 feet it is not required that the pres-
sure switch be changed. For altitudes above 8,000 feet, see kits
below.
1PS3301 - 040, 060, 080, 120
1PS3302 - 100, 130
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET "Low Voltage Wiring Diagram"
document to select and apply controls.
Johnson Controls Unitary Products
Advertisement
