Itb; Fuser - Samsung CLX-3175N/XAZ Service Manual

Disassembly and Reassembly

3.4.8 ITB

1. Press the top of ITB to down unit and take out it.

3.4.9 Fuser

1. Remove the Right cover. And remove the 2 2. Remove the 4 screw, and move the shaft as
connector as shown below. shown below. And remove the Fuser unit.
Caution - The fuser is very hot. So turn the printer
off and wait until the printer to cool before replacing
it.
3-16
Service Manual
Samsung Electronics