Samsung HP-R5052 Service Manual page 75

11-1-3 Remote Control
1 POWER button
Turns the TV on and off.
2 GUIDE button
Press to display the on-screen Electronic Program Guide (EPG).
3 ANTENNA button
Press to select "Air" or "Cable".
4 Number buttons
5 - button
Press to select additional channels (digital and analog)
being broadcast by the same station. For example, to select channel
"54-3", press "54", then press "- " and "3".
6 MUTE button
Press to mute the TV sound.
7 VOL (Volume) buttons
Use it to adjust volume.
8 Anynet button
Runs the Anynet view functions and sets up Anynet devices.
9 MENU button
Displays the main on-screen menu.
10 ENTER button
Confirms a selection.
11 FA V.CH button
Press to switch to your favorite channels.
12 CH LIST button
Displays the channel list.
13 MODE button
Selects a target device to be controlled by the Samsung remote control
(i.e., TV, STB, VCR, CABLE, or DVD).
14 PRE-CH button
T unes to the previous channel.
15 SOURCE button
Press to display all of the available video sources (TV, AV, S-Video,
Component1, Component2, PC, and HDMI).
16 CH (Channel) buttons
Use it to switch channels.
17 INFO button
Press to display information on the TV screen.
18 EXIT button
Press to exit the menu.
19 Up/Down/Left/Right buttons
Control the cursor in the menu.
Samsung Electronics
Operation Instruction & Installation
11-3