Enterasys X-Pedition XSR-3150 Getting Started Manual page 79

bc
This command initiates a cold reboot.
bw
This command initiates a warm reboot.
bp
This command changes the Bootrom password. The default password is blank. You are prompted
to enter a password by the following script:
XSR-3150:bp
Enter current password:
Enter new password: ******
Re-enter new password: ******
Password has changed.
bu
This command updates the bootrom from a local file. You are prompted to enter data by the
following script. When the "
enter . Be sure not to interrupt the process or power down the XSR or it may be affected
y
adversely. After you have updated this file, you can delete it from Flash to conserve space for
other files.
XSR-3150: bu btXSR3000_1_2.fls
Verifying btXSR3000_1_2.fls file ...
bootFirst size=28992 sum=0xc2e5 compressed_size=28992 entry=0x80020000
bootrom size=842656 sum=0xfa65 compressed_size=347728 entry=0x81e00000
OK
Proceed with erasing current Bootrom in flash and replace with btXSR3000_1_2.fls?
(y/n) y
First copy of Bootrom ...
Erasing 3 sectors at address=0xbfc20000
Programming 131072(0x20000) bytes at address 0xbfc20000
Programming 131072(0x20000) bytes at address 0xbfc40000
Programming 85600(0x14e60) bytes at address 0xbfc60000
Verifying Bootrom flash sectors
Locking 3 Bootrom flash sectors
Second copy of Bootrom ...
Erasing 3 sectors at address=0xbfca0000
Programming 131072(0x20000) bytes at address 0xbfca0000
Programming 131072(0x20000) bytes at address 0xbfcc0000
Programming 85600(0x14e60) bytes at address 0xbfce0000
Verifying Bootrom flash sectors
Locking 3 Bootrom flash sectors
Proceed with erasing Bootrom in flash
Bootrom Monitor Mode Commands
..." statement appears,
XSR Getting Started Guide 3-37