Alternative Mounting - TomTom LINK 300 Installation Manual

Using the holder
You can also choose to mount the TomTom
LINK 300 using the holder. The holder can be
affixed either with the the two self-tapping
screws or with the adhesive strips. To use the
self-tapping screws, see the description
below. To use the adhesive strips please, see
Mounting TomTom LINK 300 on page 14.
Follow the safety instructions in this
document.
1. Choose a flat surface for TomTom LINK
300.
Remember, when TomTom LINK 300 is in
the holder, it must have a clear view of the
sky.
2. Insert the two screws into the
corresponding holes in the holder.
3. Tighten the screws.
4. Carefully place the TomTom LINK 300 in
the holder until it clicks into place.

Alternative Mounting

Alternative
Mounting
19
EN