Teletext Function; Basic Operation; Using The List Mode - JVC HV-28P40BU Instruction Manual

Teletext function

Basic operation

1 Choose a TV channel with a teletext
broadcast
2 Set the VCR/TV/DVD switch to the
TV position
3 Press g (Text) button to display
the teletext
Pressing g (Text) button changes the
mode as follows:
TV mode
TEXT ---
TEXT ---
D1043
VCR/TV/
DVD
TEXT ---
TEXT ---
TV and text mode
Text mode
4 Choose a teletext page by pressing
the p p buttons, number buttons
or colour buttons
To return to the TV mode:
Press the b button or g (Text) button.
• If you have trouble receiving teletext
broadcasts, consult your local dealer or
the teletext station.
• The ZOOM function will not work in
the TV and text mode or Text mode.
• You cannot operate TV's menu when
viewing a teletext programme.
• Language display depends on the
country which was set on the
COUNTRY menu. If characters on a
Teletext programme do not appear
properly, change the COUNTRY
setting to other country's. To change
the COUNTRY setting, perform steps
1 and 2 of the "AUTO PROGRAM"
procedure on page 33 and then press
the a button.
The last teletext page displayed is memorised.
The last teletext page is cleared under
following conditions.
• Turning the power off
• Changing the channel
• Switching the TV input

Using the List Mode

You can store the numbers of your favourite
teletext pages in memory and call them up
quickly using the colour buttons.
To store the page numbers:
1 Press B button to go into the
List mode
The page numbers you have stored are
displayed at the bottom of the screen.
21