Table of Contents
Advertisement
05 During your trip
Cargo area
Steel cargo grid*
Your vehicle can be equipped with a steel grid
that helps prevent objects in the cargo area
05
from moving forward into the passenger com-
partment.
Folding the grid up/down
Grasp the lowering edge of the grid and pull it
rearward/upward, or push it downward/for-
ward.
NOTE
If the steel grid is to be used with the
optional cargo area cover, the grid must be
folded down before the cargo area cover is
put in place.
*
216
Option/accessory, for more information, see Introduction.
Installing the steel cargo grid
In order to install the steel grid, the rear seat
backrests must be completely folded down,
see page 85 for instructions.
NOTE
•
The steel cargo grid is easiest to install
by two people, and should be folded
down.
•
When installing the grid, the handle
should be on the front side of the grid
(see illustrations
–
).
•
The rear seat backrests must be folded
down when installing the steel cargo
grid, see page 85.
Put the handle in the installation position,
see the illustration. Press lightly on the
handle in order to turn it to this position,
see the arrow.
Press in the piston toward the grid and
press it into the attachment bracket near
the ceiling.
Turn the handle 90°
. Press lightly as
shown in illustration
if necessary.
Attach the grid
by moving the handle
90°.
I n f o r m a t i o n P r o v i d e d b y :
Do the same on the opposite side of the
vehicle.
Installing the cargo grid
Advertisement
Table of Contents
