Table of Contents
Advertisement
Start
Ignition switch with remote key inserted (see
page 79 for more information on ignition modes)
WARNING
Before starting the engine:
•
Fasten the seat belt.
•
Check that the seat, steering wheel and
mirrors are adjusted properly.
•
Make sure the brake pedal can be
depressed completely. Adjust the seat
if necessary.
1
On vehicles with the optional keyless drive, it is only necessary to have a remote key in the passenger's compartment.
2
If the vehicle is moving, it is only necessary to press the START/STOP ENGINE button to start the vehicle.
1. Insert the remote key into the ignition slot
with the metallic key blade pointing out-
ward (not inserted into the slot)
lightly on the remote key. It will be auto-
matically drawn into the ignition slot in the
correct position.
2. Depress the brake pedal
2
.
3. Press and release the START/STOP
ENGINE button. The autostart function will
operate the starter motor until the engine
starts.
The starter motor operates for a maximum
of 10 seconds. If the engine has not
started, repeat the procedure.
NOTE
Keyless drive*
To start a vehicle equipped with the keyless
drive feature, one of the remote keys must
be in the passenger compartment. Follow
the instructions in step 3 to start the vehicle.
I n f o r m a t i o n P r o v i d e d b y :
03 Your driving environment
WARNING
An extra mat on the driver's floor can cause
1
. Push
the accelerator and/or brake pedal to catch.
Check that the movement of these pedals is
not impeded. Not more than one protective
floor covering may be used at one time.
*
Option/accessory, for more information, see Introduction.
Starting the engine
``
107
03
Advertisement
Table of Contents
