2. Cont...
PPP over Ethernet (Australia)
Ensure the WAN Services type is set as DSL. Select Australia from the Country selection dropdown,
then select your Internet Service Provider (ISP) from the list. Once you have selected these two
entries, you will notice the majority of the fields are completed for you. Lastly enter your Username
and Passwords that have been provided by your ISP. Click on Next when you have entered your
information.
If you wish to use Wireless on your router you will now be able to configure it below. It is
recommended to change the Wireless Network Name and also use WPA2-PSK for security.
Once you have made the required changes click on Next.
5
DSL-2750B