General Items 21; Set Clock; Tv Speaker - JVC AV-27115 User Manual

Set Clock - Auto (XDS)
Before you use any of your TV's timer functions,
you must first set the clock. You may precisely set
your clock using the XDS time signal broadcast
by most Public Broadcasting (PBS) stations.
To set the clock using the XDS signal:
Enter the channel number of your local
PBS station
Press M
ENU
To SET CLOCK
To operate
To AUTO
MODE
TIME ZONE
D.S.T.
To TIME ZONE
To select your time zone
To move to Daylight Savings Time (D.S.T.)
To turn D.S.T. ON or OFF
To FINISH
To Exit and save settings
• If you do not have a PBS station in your local
area, you will have to set the clock manually. See
'Set Clock - Manual' at the top of the next column
for instructions.
• The Daylight Savings Time feature automatically
adjusts your TV's clock for Daylight Savings. The
clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back
one hour at 2:00 am on the last Sunday in
October.
NOTES:
The TV Speaker option is available only on the following models: • AV-20120, • AV-20121, • AV-27120
XDS (Automatic clock-setting feature) is available on all models except for AV-27115. You will have to reset the clock after
a power interruption of 90 seconds or longer. You must set the clock before operating any timer functions.
AUTO MANUAL
EASTERN
ON OFF
FINISH

General Items 21

Set Clock - Manual
To set your clock manually (without using the XDS
signal), choose MANUAL from the Set Clock menu
and follow the steps below.
MODE
TIME
START CLOCK
To move to the hour
To set the hour
To move to minutes
To set the minutes
To move to START CLOCK
To start clock and exit
THANK YOU !!

TV Speaker

If your TV is connected to a stereo system, you can
t u rn off the TV speakers and listen to the audio
t h rough your stereo.
P ress the M
E N U
To TV SPEAKER
TV SPEAKER
To turn the TV's speakers ON or OFF
E when finished
X I T
• Before you turn the TV Speaker setting from OFF to
ON, make sure that the T V volume level is low ! I f
the TV volume is set too high, the sound level will be
e x t remely loud.
• After a power interruption, the TV Speaker settings
will re t u rn to "ON".
AUTO MANUAL
--:-- --
b u t t o n
ON OFF