Channel List; Manual Register - JVC 1EMN24860 User Manual

Channel List

The channels selected here can be skipped when selecting the channels
-
/ + ].
using [CHANNEL
Those channels can still be selected with [the Number buttons].
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Channel List", then press
[ENTER].
4
Use [Cursor K / L] to select the channel you want to
remove, then press [ENTER].
• The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CHANNEL
• To reactivate a removed channel, use [Cursor K / L] and
press [ENTER]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the "DTV" indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
DVD
Channel
h
PICTURE
Autoscan
SOUND
Channel List

Manual Register

CHANNEL
Antenna
DETAIL
LANGUAGE
DVD
Channel List h i
PICTURE
Highlight channe s for Ch
DTV 6
SOUND Up/Down key selection
27
DTV 8
DTV 8
CHANNEL
9
DETAIL
DTV 48
58
LANGUAGE
DTV 67
DVD
BACK
Ch Select E TER Watch/Skip Back
/ ].
Manual Register
This function lets you add the channels that were not added by
the autoscan due to the receptible condition at the initial setting.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Manual Register", then
press [ENTER].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
5
Press [SETUP] to exit.
Note:
• If setup completes successfully,
"Added to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
-
• By using [CHANNEL
channels only.
English
PICTURE
SOUND
CHANNEL
DETAIL
LANGUAGE
DVD
Channel Channel
PICTURE
Autoscan
SOUND
Channel List
Manual Register
CHANNEL
Antenna
DETAIL
LANGUAGE
DVD
Manual Register
g
PICTURE
For analog channels select a
SOUND channel to register using number
keys
CHANNEL
For digital channe s you must
perform Autoscan function
DETAIL
LANGUAGE
DVD
BACK
Back
Ch Change
+
/ ], you can select the memorized
11
Reg ster
21
EN