Creating A Screen File; Overview Of Screen Files; Creating A New Screen File - NEC NC2500S DLP CInema Installation Manual

Touch Panel
3.7

Creating a SCREEN File

3.7.1

Overview of SCREEN files

SCREEN files includes the items mentioned below, which are the setting information of the
projector.
- display area information
- Anamorphic Lens information
- Crop information
To create a SCREEN file, use the "Setting" button on the "TITLE" screen. One creation
method is to call an existing file, make changes, and then save the file, and another method
is to create a new file; however, the basic operations are the same and the method of
creating a new file will be described here.
For information on assigning a PCF file to a title, see 3-5-4, "Creating a New Title" (Page 25).
3.7.2

Creating a New SCREEN File

Preparation:
Open the "TITLE" screen. For details, see 3-5-3, "Displaying TITLE Screen" (Page B-25).
[1] Press the "Setting" button on
the right-hand side of
"SCREEN File Select".
The "SCREEN File Select" screen
appears.
[2] Select the SCREEN file you
want to browse and press the
"Open" button.
To create a SCREEN file by browsing an
existing file, select the desired SCREEN
file. To create a new SCREEN file, select
"Default"
The "SCREEN
appears.
File Setup" screen
3. Setting Up Your Projector
B-37