Table of Contents
Advertisement
B006
(B006) Common Firmware Reference Codes
The common firmware detected a failure.
1. Look at the four rightmost characters of the SRC (data display for function 11-3).
These four characters are the unit reference code.
2. Find the unit reference code in the following table.
Reference Code
Description/Action
Perform all actions before exchanging Failing Items
1301
Service processor resource not available.
An activation or deactivation failed to get a resource
controlled by firmware.
1302
Not valid condition in service processor firmware.
An error in an activation or deactivation occurred.
1303
Service processor resource not available.
A resource needed to perform a requested function is
not available in the firmware.
1304
Not valid condition in service processor firmware.
The firmware has recovered from a condition that was
not expected.
1305 to 1306
Service processor card or firmware error.
A microprocessor exception occurred on the I/O adapter.
1307
Service processor resource not available.
The firmware could not allocate memory resources on
the service processor card.
1308
Not valid condition in service processor firmware.
The firmware found a condition that should not have
occurred.
1309
Service processor was not ready for interrupt that
occurred.
218
Service Guide
Failing Item
1. I/O adapter firmware problem
2. Service processor firmware
problem
1. I/O adapter firmware problem
2. Service processor firmware
problem
3. Service processor card
Location: U0.1-P1-X1
1. I/O adapter firmware problem
2. Service processor firmware
problem
1. I/O adapter firmware problem
2. Service processor firmware
problem
3. Service processor card
Location: U0.1-P1-X1
1. Service processor card
Location: U0.1-P1-X1
2. Go to "MAP 1540: Minimum
Configuration" on page 117.
1. I/O adapter firmware problem
2. Service processor firmware
problem
3. Service processor card
Location: U0.1-P1-X1
1. I/O adapter firmware problem
2. Service processor firmware
problem
3. Service processor card
Location: U0.1-P1-X1
1. I/O adapter firmware problem
2. Service processor card
Location: U0.1-P1-X1
3. Go to "MAP 1540: Minimum
Configuration" on page 117.
Advertisement
Table of Contents
