Electrical Wiring System Diagram - Sanyo SGP-EGW190M Technical Data Manual

Installation Work

(2) Electrical wiring system diagram

2. Points regarding electrical work (outdoor unit)
* When connecting indoor/outdoor control cables, no more
than two cables should be connected to a single terminal
section on the terminal board.
If you need to connect a third or fourth cable, connect
the cables to 3 and 4 on the terminal board.
*Use only the recommended inverter. Operation with any
other inverter is not assured.
(Recommended inverter: SIEMENS 製 S１TOP solar 4000)
E-11