Installation Location.3; Electrical Requirements.3; Safety Instructions.3 - Sanyo KHS0921 Instruction Manual

Installation Location
• We recommend that this air conditioner must be installed
properly by a qualified installation technician in accordance
with the Installation Instructions provided with the unit.
• Before installation, check that the voltage of the electric supply in your
home or office is the same as the voltage shown on the nameplate.
sulphurous air near a spa.
Electrical Requirements
1. All wiring must conform to the local electrical codes. Consult your
dealer or a qualified electrician for details.
2. Each unit must be properly grounded with a ground (or earth) wire or
through supply wiring.
3. Wiring must be done by a qualified electrician.
To warm up the system, power mains must
be turned on at least five (5) hours before
operation. Leave the power mains ON
unless you will not be using this appliance
for an extended period.
• Power supply: 60 Hz, single-phase
KHSDDZI
115 VOLT
KHSnn22
230/208 VOLT
Safety Instructions
• Read this booklet carefully before using this air conditioner. If
you still have any difficulties or problems, consult your dealer
for help.
• This air conditioner is designed to give you comfortable room
conditioners. Use this only for its intended purpose as
described in these instruction Manual.
This is dangerous because the fan is rotating at high speed.
• Do not let children play with the air conditioner.
• Do not cool or heat the room too much if babies or invalids are
present.
07
-
346-03 3