Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Nortel Manuals
  4. Intercom System
  5. Business Series
  6. Installation manual

Nortel Business Series Installation Manual

Hide thumbs Also See for Business Series:

Advertisement

Quick Links

Download this manual
Business Series Terminal
Doorphone
Installation Guide

Advertisement

loading

Related Manuals for Nortel Business Series

Summary of Contents for Nortel Business Series

  • Page 1 Business Series Terminal Doorphone Installation Guide...
  • Page 3 Preface This guide explains how to install and program a Business Series Terminal (BST) Doorphone on Norstar telephone systems. To use this guide, you must: • be a Nortel Networks installer • know basic Norstar terminology If you are installing a BST Doorphone on a Business Communications Manager system, refer to the BST Doorphone Installation and Configu- ration Guide.
  • Page 4 Both BST and Norstar Doorphones can be installed on Norstar systems with a maximum of four Norstar Doorphones on any system. Up to 54 Doorphones can be installed on Norstar Modular systems. For example, 50 BST Doorphones and 4 Norstar Doorphones. Up to 20 Doorphones can be installed on Norstar Compact systems.
  • Page 5 Preparing to install a BST Doorphone Before installing a BST Doorphone, you must select and program a vacant station port on the Norstar system for BST Doorphone compatibility. Note: Default settings can cause the BST Doorphone to automatically answer incoming calls that are not intended to be heard over the BST Doorphone.
  • Page 6 Terminals & Sets Line Access Compatible settings for the BST Doorphone Line assignment Remove all lines assigned to the DN. Note: If all lines are not removed, incoming calls will automatically be answered by the BST Doorphone. Line pool access Remove all line pools assigned to the DN.
  • Page 7 Capabilities continued Compatible settings for the BST Doorphone Paging Y (Yes) Hotline None Aux. ringer N (No) Name Assign a name for the BST Doorphone, such as BACKDR for Back Door. Trunk/Line data Compatible settings for the BST Doorphone Prime set Ensure the BST Doorphone DN is not assigned as a prime set for any line on the system.

  • Page 8: Bst Doorphone Installation

    BST Doorphone and the Norstar system is routed outside a building, such as aerial or buried cable. Protection devices must be installed at each end of the exposed cable. Nortel Networks recommends the ITW LINX MP1A-90-27 secondary protector for this purpose.
  • Page 9 Wire and mount the BST Doorphone 1. Remove the BST Doorphone’s faceplate. 2. Determine if you want a surface or flush mount installation. For a surface mount: Surface mount - Discard the flush mount gasket Surface mount gasket Main housing - Verify the correct orien- assembly tation of the gasket.
  • Page 10 Run a standard 3-pair cable from TCM connector screw block the Norstar system to the BST Doorphone location. Use one pair to connect the “KSU” SAPS terminals of the BST Doorphone to a reserved station port on the Norstar system. All BST Doorphone connections Strip wires 6 mm (1/4 inch) before are polarity insensitive.

  • Page 11: Doorphone Programming

    BST Doorphone initialization Depending on your system, the BST Doorphone can take several min- utes to initialize. It will not initialize, if a Norstar configuration session is in progress. Once initialization is complete, the BST Doorphone will identify itself to the system as a M7324 telephone.
  • Page 12 Note: Five or three digit feature codes are assigned to BST Door- phones depending on your system software version (for example, F9#000 or F900). Three digit feature codes are assigned to Norstar Doorphones (for example, F900) The NEXT display button only appears when more than one Doorphone is installed on the system.
  • Page 13 Note: The Call telephone automatically rings when the Doorphone’s Call button is pressed. See "Doorphone configuration tips" on page 13 for information on how to program the Doorphone to ring multiple telephones. 7. The display shows the number of rings that will Rings: 5 CHANGE occur at the Call telephone before page chimes...
  • Page 14 10. If no door opening device is connected to the Openertype:none CHANGE Doorphone, press OK and go to step 12. if a door opening device is connected to the Doorphone, press CHANGE to select DOC or ERM, then press OK. Note: For information on door opening devices, see "Optional equip- ment"...
  • Page 15 Doorphone testing You can perform the following tasks to test the Doorphone settings: • Press the Call button on the Doorphone and ensure the Call telephone rings. • Let the Call telephone ring until the call is automatically discon- nected. Ensure that a page tone followed by the Doorphone’s distinctive chime is heard at specified telephones included in the Doorphone’s page zone.

  • Page 16: Optional Equipment

    • The Doorphone can ring several telephones on the system using Answer DNs. Program one or more telephones to have a Ringing Answer button for the Call telephone. - For example, The Call telephone is DN 230. Assign DN 230 as an Answer DN for extensions 223, 224 and 225 in Norstar con- figuration programming.

  • Page 17: Troubleshooting

    Troubleshooting Doorphone is not working • Check the wiring. Without a Station Auxiliary Power Supply (SAPS) installed, the wiring must be equivalent to 300 m (1000 ft.). With a SAPS installed, the distance can be increased to 780 m (2600 ft.). •...
  • Page 18 Doorphone does not present page chimes after the programmed ring time at the Call telephone In Doorphone programming: - Ensure Page zone 1, 2 or 3 is selected. - Ensure at least one telephone is assigned to the selected page zone and not in use during this test.
  • Page 19 1-800-4 NORTEL www.nortelnetworks.com © 2003 Nortel Networks P0607324 01 Printed in Canada...