4-4-8 :
Smart Cloning Functions (2)
( II ) Importing functions
NOTE
Any settings done and exported from a "Mother TV" can
only be imported on the same series of TVs (any size).
1) To copy the settings from the USB memory to "Child TVs",
you must first put "Child TVs" into "Hotel Menu Mode" or
"Hotel Mode".
2) Insert the prepared USB memory into a USB slot on a
"Child TV".
3) AC Plug OFF the "Child TV" and then ON back again.
4) The "Child TV" will detect the USB memory and import the
settings.
All three Picture Off/ Timer, Standby, Power Indicator will light up
as below:
5) After a few seconds, only the Power Indicator remains lighted
and the TV will show a blank screen. This shows you have successfully
imported the settings to the "Child TV".
6) Then the TV automatically reboot in "Hotel Menu Mode".
Picture Off/ Timer Standby
Figure: 15
Power Indicator
– 32 –
Figure: 14