JVC DR-MV5BEK Instructions Manual page 85

Filename [MV5SEK_13Subsidiary.fm]
MV5SEK_00.book Page 85 Wednesday, August 31, 2005 7:58 PM
Manual Channel Set
Store channels that were not stored during Auto Set Up
( pg. 17), Preset Download (
( pg. 84).
VHS
ENTER
Page 85Wednesday, 31 August 2005 19:58
pg. 18) or Auto Channel Set
SET UP
Masterpage:Right+
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press t.
3
Press w e to select "MANUAL CH SET", then press t. The
Confirmation screen appears.
4
Press rt w e to select a
blank position in which you want
to store a channel, then press
ENTER twice. The Manual
Channel Set screen appears.
5
Press rt to select "BAND",
then press ENTER.
6
Press rt to change the band
between CH (regular) and CC
(cable), then press ENTER.
7
Press rt to select "CH", then
press ENTER.
8
Press rt to input the channel
number you want to store.
To enter the registered station
name ( pg. 97), press rt to
select "ID", then press ENTER. Press rt.
For fine tuning adjustment, press rt to select "FINE", then press
ENTER. Press rt to perform fine-tuning.
When "L-2 SELECT" is set to "VIDEO/RGB", "S-VIDEO/RGB" or
"SAT VIDEO/RGB", the "DECODER" setting cannot be changed.
( pg. 45)
9
Press ENTER to enter new channel information. The
Confirmation screen appears.
Repeat steps 4 – 9 as necessary.
10
Press SET UP to close the Confirmation screen.
When Auto Channel Set is completed, "PLEASE WAIT" will be
displayed for about 90 seconds, since channel data is exchanged
between the DVD deck and the VHS deck. No operations will be done
during this time.
To change positions, see "Change Station Channel Position"
( pg. 86).
If you wish to set station names other than the ones registered in your
unit, see "Set Stations (B)" ( pg. 87).
ATTENTION:
Guide Program numbers are not set when channels are stored
manually. ( pg. 83, "VIDEO Plus+ System Setup")
SUBSIDIARY SETTINGS
85
EN
(Example) To store in position 12.
DVD SET UP FUNCTION SET UP INITIAL SET UP
INITIAL SET UP / MANUAL CH SET
PR CH ID PR CH ID
01 26 BBC1 08 ----
02 33 BBC2 09 ----
03 23 ITV 10 ----
04 30 CH4 11 ----
05 37 CH5 12 ----
06 ---- 13 ----
07 ---- 14 ----
SET UP OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
RETURN
The programme currently received
on the selected channel position
appears behind the confirmation
screen.
DVD SET UP FUNCTION SET UP INITIAL SET UP
INITIAL SET UP / MANUAL CH SET
BAND
CH
CH
CC
CH
01
ID
E-SP
DECODER OFF
FINE
OK
SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
RETURN