JVC DR-MV5BEK Instructions Manual page 13

Filename [MV5SEK_05Name.fm]
MV5SEK_00.book Page 13 Wednesday, August 31, 2005 7:58 PM
On-Screen Display (VHS deck)
When "SUPERIMPOSE" is set to "AUTO" and ON SCREEN on the remote control is pressed, various operational indicators appear on the
TV screen. To clear the operational indicators, press ON SCREEN twice.
A Operation Mode Indicators
B Tape Speed (SP/LP)
C Tape Direction
D Index Mark Indicator (MARK)
E Counter Display
F Tape Remaining Time Indicator
G Audio Mode Display
pg. 60
Page 13
H Tape Position Indicator
I VPS/PDC Indicator*
* VPS (Video Programme System) recording is not currently available in the
J Type of Broadcast
K Current Day/Month/Year
pg. 28
L Clock Display
M Channel Position Number and Station Name/Auxiliary
pg. 64
* When "L-2 SELECT" is set to "SAT VIDEO/RGB" (
N "Cassette Loaded" Mark
The tape position indicator
appears on the TV screen
when you press 3 or 5
from the Stop mode or perform
an Index Search. ( pg. 59)
The position of "q" in relation to
"0" (beginning) or "+" (end)
shows you where you are on
the tape.
NOTE:
Depending on the type of tape
being used, the tape position
indicator may not appear correctly.
pg. 30
U.K. and not possible with this unit.
pg. 64
Input Indicator (L-1, L-2, F-1 or SAT*)
appears instead of "L-2".
Wednesday, 31 August 2005 19:58
Masterpage:Right+
INDEX
13
EN
Beginning End
pg. 45), "SAT"