Advertisement
Operation Guide 5381
•
To return the time setting to its initial default setting, press D and B at the
same time.
•
Turning on summer time in the Timekeeping Mode, causes the high tide time
also to be advanced by one hour.
3. Press A to complete the calibration process.
This returns to the tide screen.
E-40
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 31 time zones (48 cities) around the globe.
The city that is currently selected in the World Time
Mode is called the "World Time City".
•
The hour, minute, and tide hands indicate information
for the currently selected Home City.
World Time City information
E-42
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, use D (East) to display the
DST indicator
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down A for about two seconds.
•
This toggles the city code you selected in step 1
between Daylight Saving Time (DST indicator
displayed) and standard time (DST indicator not
displayed).
•
Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as
the World Time City.
•
The standard time/daylight saving time (DST) setting
affects only the currently displayed city. Other cities
are not affected.
E-44
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use C to select the Stopwatch Mode as shown on
page E-13.
Seconds
Minutes
E-46
Note
•
The Stopwatch Mode can indicate elapsed time up to 59 minutes, 59 seconds.
•
Once started, stopwatch timing continues until you press D to stop it, even if
you exit the Stopwatch Mode to another mode and even if timing reaches the
stopwatch limit defi ned above.
•
Exiting the Stopwatch Mode while a split time is frozen on the display clears the
split time and returns to elapsed time measurement.
E-48
Counter
You can use the counter to count up to 999 objects or events.
1. In the Timekeeping Mode, press C to enter the
Counter Mode (page E-13).
2. Use D (count up) and A (count down) to control
the count.
•
To reset the count value to 000, hold down A for at
least two seconds.
Count value
To enter the World Time Mode
Use C to select the World Time Mode as shown on page E-13.
•
The display changes as shown below.
1 second
(1) Mode name
(2) World Time City
city code
To view the time in another time zone
Press D to display the currently selected city code. Pressing D within two
seconds after the city code appears, changes the city code setting.
•
Each press of D advances to the next city code.
•
To change the city code to UTC, press B and D at the same time.
•
Press A to display the city code and name of the currently selected city.
To swap your Home City and World Time City
In the World Time Mode, press A and B at the same time.
This swaps your Home City and World Time City.
Example: To swap the Home City (TYO) and World Time City (NYC)
A+B
World Time City
New World Time
(NYC) time
City (TYO)
To perform an elapsed time operation
D
D
D
Start
Stop
(Resume)
To pause at a split time
D
A
A
Start
Split
Split release
(SPL displayed)
To measure two fi nishes
D
A
D
Start
Split
Stop
(SPL displayed)
Second runner
First runner fi nishes.
fi nishes.
Display time of fi rst
runner.
Countdown Timer
The countdown timer can be set within a range of
one minute to 60 minutes. An alarm sounds when the
countdown reaches zero.
To enter the Countdown Timer Mode
Use C to select the Countdown Timer Mode as shown
on page E-13.
Seconds
Minutes
E-41
2 seconds
D
(3) World Time
City time
E-43
2 seconds
TYO time
E-45
D
A
(Stop)
Reset
D
A
Stop
Reset
A
A
Split release
Reset
Display time of
second runner.
E-47
E-49
Hide quick links:
Advertisement
