Table of Contents
Advertisement
1.4
Configuring TCP/IP protocol
The TCP/IP protocol must be installed, as this step enables you to be identified on the Internet.
Without this information, you will not be able to access the Internet. It is therefore important
that you make sure that the data you enter is accurate. Please refer to the
"Important Information" that you wrote down on the last page of this document.
Before configuring the IP address, make sure that the physical components are working
properly. The network interface card needs to have been configured and the modem installed in
order to do this.
Windows 2000 and XP:
1. Click on Start > Settings > Control Panel.
2. Double-click on
"Network and Dial-up
Connections".
3. Right-click on your
"Local Area Connection".
Then click on Properties.
4
Hi-Speed Internet User Guide
Advertisement
Table of Contents
