Table of Contents
Advertisement
1.3
Connecting wireless modem router
* Use Crossover cable when connecting to a hub or switch without an uplink port.
There is no software installation required when using an Ethernet connection.
Wireless Modem Router
Wall-mount Filter
For a wall-mounted phone, use a
wall-mount filter:
1. Remove the phone from the wall.
2. Connect the wall-mount filter to
the all plate.
3. Reconnect the phone.
Connection steps :
1. Connect the Ethernet cable
(RJ-45) to the Ethernet port
on the wireless modem router
(yellow port).
2. Connect the other end to the
Ethernet port on your computer.
3. Plug the DSL cable (RJ-11) into
the DSL port on the wireless
modem router (gray port).
4. Plug the other end of the
DSL cable (RJ-11) into the phone
jack.
5. Plug the power adapter into the
power outlet and the wireless
modem router (black port).
6. Ensure that the wireless modem
router is powered on.
The power switch is on the right
side of the back panel.
3
Advertisement
Table of Contents
