Cylinder Head Removal - Honda TRX70 Fourtrax 1986 Service Manual

CYLINDER HEAD REMOVAL
Remove the following parts:
- exhaust
pipe
(page 13-3 "
- timing inspection hole cap .
- spark plug cap.
Remove the cam sprocket cover bolt and cover from the left
side of the cylinder head .
Remove the recoil starter by removing the mounting bolts .
Turn the flywheel counterclockwise and align the T-mark with
the index mark.
Remove the cam chain tensioner sealing bolt and spring (page
94) .
Make sure that the O-mark on the cam sprocket aligns w ith the
index mark on the cylinder head.
Hold the flywheel and remove the three attaching bolts and the
cam sprocket.
Loosen the cylinder head bolt and the cylinder mounting bolt.
Remove the intake pipe mounting bolts.
CYLINDER HEADIV A LVES
6-3