Operations On Dvd Deck; Basic Playback - JVC HR-XVC29SU Instructions Manual

40
EN

Basic Playback

Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch on the Remote to the
right.
Load a disc.
Slide to the
right.
Number keys
RETURN
TOP MENU
3 PLAY
1 REW
7 STOP
4 SKIP
SKIP ¢
ATTENTION
You can not use the DVD deck when the VCR deck is in
the Automatic Satellite Recording standby and recording
mode.
You can use the DVD deck when the VCR deck is in the
timer standby mode.
If the unit does not accept an operation,
TV screen. (Operations are occasionally unacceptable
even if is not displayed.)
To play back a JPEG disc, see pages 49 – 51.
OPEN/CLOSE
VCR/DVD 7 STOP 3 PLAY
DVD
MENU
ENTER
DISPLAY
FF ¡
8 PAUSE
appears on the

OPERATIONS ON DVD DECK

A
Load the disc.
For details, refer to "Placing a Disc" (
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up on the front display panel.
On the Remote
Press DVD so that the DVD indicator lights up on the
front display panel.
C
Start playback.
Press 4 PLAY.
Example: DVD VIDEO
Title number
Playback time
You can switch the display on the front display panel between
the title/chapter/track number and the playback time by
pressing DISPLAY.
It may take a few seconds to start playback.
When inserting a DVD or Video CD disc, a menu display may
appear on the TV screen. To play back from the menu, refer to
"Locating a Desired Scene Using the Menu of the Video CD
with Playback Control (PBC) Function" (
"Locating a desired scene using the DVD menu" (
D
Pause playback.
Press 9 PAUSE.
To resume normal playback, press 4 PLAY.
E
Stop playback.
Press 8 STOP.
When "RESUME" ( pg. 64) is "ON," the unit memorizes the
position on the disc where you have interrupted playback.
-To resume playback, press
-To stop playback completely, press
Press x OPEN/CLOSE on the DVD deck to open the disc tray,
then remove the disc.
pg. 8).
Chapter number
pg. 41) or
pg. 41).
.
PLAY
4
.
STOP again
8