Next Function Memory; Repeat Playback - JVC HR-XVC29SU Instructions Manual

POWER
EJECT
Slide to the
right.
3 PLAY
1 REW
7 STOP
7 STOP 3 PLAY
1 REW FF ¡
POWER
TIMER
FF ¡

Next Function Memory

The Next Function Memory "tells" the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a- For Automatic Start Of Playback
Press 3 REW, then press 4 PLAY within 2 seconds.
b- For Automatic Power Off
Press 3 REW, then press POWER within 2 seconds.
c- For Automatic Timer Standby
Press 3 REW, then press TIMER within 2 seconds.
d- For Automatic Cassette Ejection After Tape Rewind
Press 3 REW, then press x EJECT within 2
seconds.

Repeat Playback

Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Start playback.
Press 4 PLAY.
2
Activate Repeat Playback.
Press 4 PLAY and hold for over 5 seconds, then release.
The Play indicator ($) on the front display panel blinks slowly.
After playing back a tape 100 times, the unit stops
automatically.
3
Stop Repeat Playback.
Press 8 STOP at any time.
Pressing 4 PLAY, 3 REW, FF 5 or 9 PAUSE also stops
Repeat Playback.
One Touch Replay
Press during playback.
Pressing once moves the playback position back to about 7
seconds before the current position. You can press
times each One Touch Replay.
29
EN
up to 4