Table of Contents
Advertisement
The unit stores the points that you
want to watch again up to 3 points.
You can resume playback from
each scene.
NOTES:
•
Some discs may not work with the
marking operation.
•
The marking is canceled when you
open the disc tray or turn the power off.
•
Some subtitles recorded around the
marker may fail to appear.
Marking desired scenes
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light.)
Marking the scenes
1
Press MARKER during
playback.
2
Select the blank Marker using
/
.
Then press ENTER at the desired
scene.
• Repeat this procedure to set
the other 2 scenes.
3
Press MARKER to remove this display.
Returning to the scenes
1
Press MARKER during playback
or stop mode.
2
Press
/
to select the Marker
1-3.
3
Press ENTER.
Playback starts from the marked scene.
To cancel the mark
1
Press MARKER.
2
Press
/
to select the Marker 1-3.
3
Press CANCEL.
To remove this display, press MARKER.
47
Advertisement
Table of Contents
