Table of Contents
Advertisement
Before Operation-VCR part
How to use the main menu
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled by the Remote Control
Handset.
1. Switch on your TV set and DVD+VCR by pressing
the Í/I button.
2. Press i button.
The main menu will appear on the TV screen.
f
OSD
OSD
ON
OFF
• REC - Timer recording setting (see p. 23).
• PR SET - Manual tuning setting (see p. 15).
• ACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
• SET - Date & clock setting (see p. 13).
• SYS - To set the Colour TV System (see p. 13).
•
(Dr.) - To check a problem with your VCR (see
p. 26).
• F.OSD ON/OFF - To display the operational mode
of your VCR (see p. 25).
•
(16:9/4:3) - To select the aspect ratio of your
TV (see p. 26).
• DECODER - To use a pay-TV decoder (or
Satellite) with your VCR (see p. 26).
•
(OPR) - To improve the playback picture (see p.
20).
Appear when playback only.
• NIC - To activate or deactivate the NICAM digital
sound (see p. 25).
Tip:
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 17.)
3. Press 2 and 1 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
4. Press i to return to a TV picture.
14
1 2
SET
SYS
Tuning in TV Stations
Automatically
If the TV broadcast signal is weak your DVD+VCR
may not detect the necessary information and will
not be able to store them correctly. To overcome
this problem please turn to the MANUAL TUNING
section on page 15.
1. Press Í/I to turn on your DVD+VCR.
2. Press i button.
The main menu will appear on the TV screen.
Press 2 or 1 to select the ACMS.
Press ENTER/OK.
Pr-12
ACMS
f
OSD
OSD
ON
OFF
Pr-12
ACMS
3. If you have a satellite receiver, make sure that it is
connected to your VCR, switched on and Sky News
has been selected.
4. Press ENTER/OK to start the automatic storing of
the channels of the TV stations in your area.
5. The TV STATION TABLE will appear when tuning is
completed.
Press i to save your settings.
01
C01
02
C02
03
C03
04
05
06
07
08
P SET
R
Notes:
The DVD+VCR's clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see "Setting the clock Manually" on page 13.
1 2
SET
SYS
Pr-12
ACMS
OK i
ACMS
OK i
00
- - - - -
00
- - - - -
00
- - - - -
- -
- -
- - - - -
- -
- -
- - - - -
- -
- -
- - - - -
- -
- -
- - - - -
- -
- -
- - - - -
MOVE :
DELETE :
,
OK i
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
