Table of Contents
Advertisement
Installation
Motion Detector
Installing the Motion Detector
• Attach the Motion Detector to a wall at a height of 5 to 6ft using the mounting bracket
and screws provided.
Note: The Motion Detector has a special lens that 'looks' downwards. It must therefore
be mounted to face outwards horizontally, i.e. do not 'aim' the sensor downwards.
• Set the slide switch to position 1 for instant triggering for maximum sensitivity or
position 2 to trigger only after two movements have been sensed.
Registering the Motion Detector with the Security Console
• Fit four AA Alkaline batteries in the battery compartment.
• Press the CODE button using a pencil or other pointed object to generate a new
security code.
• Set the slide switch on the Security Console to INSTALL.
• Press the TEST button on the Motion Detector. The console chimes once to confirm
and the next available zone LED lights.
Note: If the Motion Detector senses movement before you press the TEST button it
may register itself automatically. You may want to keep the batteries out of the Motion
Detector until you are ready to install the zone, or install the Motion Detectors last.
®
™
Tampa, FL33618
12
Technical Support: 800 832 4003
PRO2000_DR/AB-6/98
Advertisement
Table of Contents
