Table of Contents
Advertisement
c
System Setup
IMPORTANT:
Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18)
or Auto Channel Set (A pg. 83) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
●
When timer-programming with the
channel position, where the station you wish to record is
received on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
^ Set the Guide Programme number for that station manually.
●
When you wish to timer-record a satellite programme with the
a
system,
^ Set the Guide Programme numbers for all satellite
broadcasts received on your satellite receiver.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
Guide Programme Number Set
1
Press SET UP to access the Main Menu screen.
2
Press D E to select AINITIAL SET UPB, then press G.
3
Press D E to select ATUNER
SETB, then press G.
4
Press FGD E to select
AGUIDE PROG SETB, then
press ENTER.
5
Press F G to select AGUIDE
PROGB, then press ENTER.
6
Press F G to select the Guide
Programme number for the
desired station as shown in
the TV listings. Then press
ENTER.
7
Press F G to select ATV
PROGB, then press ENTER.
Press F G to select the number of the unit's channel position
on which the Guide Programme number's broadcast is received
by the unit or the satellite receiver. Then press ENTER.
●
Pressing AUX changes ATV PROGB to ASATB.
●
To timer-record a satellite programme with the
system, you need to install the provided Satellite Controller and
perform the procedure described in ASatellite Receiver Control
Setting (HDD & DVD Deck Only)B (A pg. 22).
●
Repeat steps 5 – 7 as necessary.
8
Press SET UP to complete the setting.
Guide Programme Number
AGuide Programme (GUIDE PROG) numberB refers to the
assigned TV station numbers, according to broadcast area, for
a
the
timer recording. The Guide Programme Numbers
can be found in most TV listings.
a
system, the
DVD VIDEO SET UP
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
TUNER SET
CLOCK SET
AUTO CH SET
MANUAL CH SET
SAT CONTROL SET
GUIDE PROG SET
11
12
13
SET UP
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
11
12
INITIAL SET UP > GUIDE PROG SET
13
1
GUIDE PROG
YLE2 1
TV PROG
RETURN
SET UP
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
a
Tuner Set
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR +/– buttons without going through any
vacant channels.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
IMPORTANT:
Perform the following steps only if ^
^ Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (A pg. 17, 18)
^ you have moved to a different area or if a new station starts
broadcasting in your area.
Auto Channel Set
1
Press SET UP to access the Main Menu screen.
2
Press D E to select AINITIAL SET UPB, then press G.
3
Press D E to select ATUNER SETB, then press G.
4
Press FGD E to select AAUTO
CH SETB, then press ENTER.
5
Press FGD E to select your
country's name, then press
ENTER.
6
Press FGD E to select the
language of your choice.
7
Press ENTER twice.
●
When you have connected the
unit to a TV offering T-V Link
via a fully-wired 21-pin SCART
cable (A pg. 16), the unit
automatically performs the
Preset Download and the T-V
LINK screen will appear.
(A pg. 18)
●
The Auto Set screen appears,
and remains on screen while the unit searches for receivable
stations.
SUBSIDIARY SETTINGS
EN
CABLE/SAT
TV
DVD
rtwe
SET UP
DVD VIDEO SET UP
HDD/DVD SET UP
INITIAL SET UP
FUNCTION SET UP
TUNER SET
CLOCK SET
AUTO CH SET
MANUAL CH SET
SAT CONTROL SET
GUIDE PROG SET
11
12
13
SET UP
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
ENTER
SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT
SELECT
83
Advertisement
Table of Contents
