System Connections
Connecting To A Dolby Digital Decoder or
An Amplifier With A Built-in DTS
(DVD deck only)
To Digital audio
input
Your unit
DIGITAL AUDIO OUT
30
Dolby digital
decoder or amplifier
with a built-in DTS
Coaxial digital audio cable
(not supplied)
These instructions enable you to connect your unit to
dolby digital decoder or amplifier with a built-in DTS.
Connect the coaxial cable between the unit and the
Dolby Digital decoder or amplifier with a built-in DTS.
NOTES:
• For Dolby digital sound, set "DIGITAL AUDIO OUTPUT" to
"DOLBY DIGITAL/PCM." (☞ pg. 35)
• For DTS sound, set "DIGITAL AUDIO OUTPUT" to "STREAM/
PCM." (☞ pg. 35)