General Settings - Psm; Basic Procedure - JVC EXAD KD-NX901 Instructions Manual

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Ex.: When you select "Scroll"
Indications
Demo
Display demonstration
KeyIn CFM
Key-in confirmation
24H/12H
Clock system
Time
Time
3
4
5
Selectable settings, [reference page]
Interval: [Initial]; Display demonstration is activated and shown in
one-minute intervals.
All Time: Display demonstration is activated.
Off: Cancels, [14].
• Display demonstration starts if no operation is done for about
one minute.
On: [Initial]; Power-on, power-off, source (or compass) animations
are activated.
Off: Cancels.
12Hours O 24Hours, [14]
[Initial: 24Hours]
Set the local time (in one-hour intervals).
It is not required to set the minute since it is automatically adjusted
by referring to the received GPS signals.
[Initial: 00:00]
Adjust the PSM item selected.
2
Repeat steps and
other PSM items if necessary.
Finish the procedure.
3
to adjust the
To be continued...
87