Storing Stations In Memory - JVC EXAD KD-NX901 Instructions Manual

When an FM stereo broadcast is hard to
receive
1
2
MONO indicator lights up.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure. "Mono Off" appears and the MONO
indicator goes off.
Tuning in FM stations only with
strong signals
If received signals are weak, you may only
hear noises. You can make this unit detect only
stations with sufficient signal strength while
searching for FM stations.
1
2
• DX: To tune in to all receivable stations.
The DX indicator lights up.
• Local: To tune in to only stations with
sufficient signal strength.
LOCAL indicator lights up.

Storing stations in memory

You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
2
Select the FM band (FM1 – FM3)
you want to store into.
3
4
"SSM" appears, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into the
preset number 4 of the FM1 band.
1
To be continued...
43