Switching On; Selecting A Programme; Starting The Programme; Programme Sequence Indicators - Miele Dishwashers Operating Instructions Manual

Switching on

^ Make sure the spray arms are not
obstructed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Switch the dishwasher on using the
On/Off button K.
The O programme sequence indicator
light will come on if the programme
selector has not been turned to a
programme.

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.

Starting the programme

^ Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The J / M indicator light will flash.
^ Press the J / M button.
The programme will begin. The J / M
and 8 indicators will light up.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Programme sequence
indicators
After a programme has been started
the current stage of the programme is
indicated by the programme sequence
indicator lights.
Operation
31