Channel Scan Feature; Dual Watch Mode - Motorola TLKR T7 Owner's Manual

TLKRT7new.fm Page 10 Friday, May 23, 2008 9:18 AM

Channel Scan Feature

Your TLKR T7 radio has a channel scan feature
that allows you to easily scan all 8 channels.
When an active channel is detected, the radio
will pause on that channel until the channel is
clear. Then after 2 second (5 seconds for VOX
On without Headset) pause, the radio will
continue scanning. Pressing the PTT key while
the scan is paused on a channel will allow you
to transmit on that channel and exit scan mode.
To turn the channel scan ON:
1. Enter the Common Menu and select "SCAN".
2. Press SEL/ . The channel number on the
display changes rapidly as the radio cycles
through the channels.
To turn the channel scan OFF:
Press the MENU/GRP or PTT key.

Dual Watch Mode

Your radio can scan the current channel and
another channel alternately. You need to set a
channel number and its Sub-code for another
channel.
10
To set the another channel and start Dual
Watch:
1. Enter the Common Menu and select "2CH",
then press SEL/ key to proceed to Dual
Watch Mode setting. The Dual Watch icon
appears.
2. Press the or to select the channel
number, then press the SEL/ key.
3. Press the or to select the Sub-code
number, then press the SEL/ key.
4. The radio starts Dual Watch.
If you set the same channel number and
Note:
Sub-code as the current channel, Dual
Watch does not work.
To turn the Dual Watch mode OFF:
Press the MENU/GRP key.