Toyota 2007 CAMRY Manual page 164

System Outline
Automatic Light Control Operation
The automatic light control system works when the light control SW is turned to AUTO. The automatic light control sensor
detects the brightness around the vehicle. By this function, the system automatically turns the tail lamp and headlamp on if
the brightness is below the regular level and turns the tail lamp and headlamp off when the surroundings become brighter
than the regular level.
Light Auto Turn Off Operation
∗ When the other lamps than headlamps are lit under 'TAIL' or 'AUTO' condition of the light control SW, the tail lamps and
front fog lamps are turned OFF if the power SW is changed from 'IG ON' to 'IG OFF' (Power SW type) or the ignition SW is
turned from ON to OFF (Ignition SW type), and the driver side door is opened from closed condition.
∗ When the headlamps are lit under 'HEAD' or 'AUTO' condition of the light control SW, if the power SW is changed from 'IG
ON' to 'IG OFF' (Power SW type) or the ignition SW is turned from ON to OFF (Ignition SW type), and the light OFF delay
time (30 seconds) has passed since all the doors are closed from open condition or under all the door locked condition,
operating the wireless door lock function turns OFF the headlamps, tail lamps and front fog lamps.
: Parts Location
Code See Page
E6 A 56
E7 B 56
A 56
E11 E11
B 56
: Relay Blocks
Code See Page Relay Blocks (Relay Block Location)
1 22 Engine Room R/B (Engine Compartment Left)
: Junction Block and Wire Harness Connector
Code See Page Junction Block and Wire Harness (Connector Location)
1D 25
1F
Engine Room Main Wire and Engine Room J/B (Engine Compartment Left) Engine Room Main Wire and Engine Room J/B (Engine Compartment Left) Engine Room Main Wire and Engine Room J/B (Engine Compartment Left)
22 22
1G
3C
3F
3G 36 36 36 36 Instrument Panel Wire and J/B No.3 (Behind the Combination Meter) Instrument Panel Wire and J/B No.3 (Behind the Combination Meter) Instrument Panel Wire and J/B No.3 (Behind the Combination Meter) Instrument Panel Wire and J/B No.3 (Behind the Combination Meter)
3N
3O
IA
30 30 Engine Room Main Wire and Instrument Panel J/B (Cowl Side Left) Engine Room Main Wire and Instrument Panel J/B (Cowl Side Left)
ID
IF
30 30 Instrument Panel Wire and Instrument Panel J/B (Cowl Side Left) Instrument Panel Wire and Instrument Panel J/B (Cowl Side Left)
IM
IO 30 Floor Wire and Instrument Panel J/B (Cowl Side Left)
: Connector Joining Wire Harness and Wire Harness
Code See Page Joining Wire Harness and Wire Harness (Connector Location)
EN2 66 Instrument Panel Wire and Floor Wire (Left Kick Panel)
EO2 66 Instrument Panel Wire and Floor No.2 Wire (Right Kick Panel)
FE3 66 Instrument Panel No.2 Wire and Instrument Panel Wire (Instrument Panel Center)
: Ground Points
Code See Page Ground Points Location
E2 66 Instrument Panel Brace LH
F1 66 Instrument Panel Left
Code See Page
E21 56
E49 57
A 60
N6 N6
B 60
CAMRY (EM0250U)
Code See Page
A 60
N13 N13
B 60
O6 60
O10 60
163